Ihse Draco MultiView 4K60 MV42 Series User Manual page 67

Hide thumbs Also See for Draco MultiView 4K60 MV42 Series:
Table of Contents

Advertisement

Draco Multiview 4K60
The following parameters can be configured:
SNMP Agent
Traps
SNMP Agent
Port
Configured SNMPv3
User
SNMP Trap
Traps
Enable Traps
SNMP Server
Port
Select All
Switch Command
Output Inserted
Output Removed
Video Input Changed Notification about a change of resolution or change of frequency
EDID Change
Power Supply 1
Power Supply 2
Activating the SNMP agent
To activate the SNMP agent, proceed as follows:
1. Select System Settings> Network in the task area.
2. Select the SNMP tab in the working area.
3. Click the SNMP Agent checkbox within the SNMP Agent area.
By activating this option, the permission for an active query of the SNMP agent is granted.
4. Click the Apply button to confirm your changes.
Configuring SNMP traps
To activate the SNMP traps, proceed as follows:
1. Click the Enable Traps checkbox within the SNMP Trap area.
This function allows an active transmission of trap messages from the SNMP agent to the
SNMP server.
2. Enter the IP address of the SNMP server under SNMP Server.
3. Click the checkboxes of the desired traps to activate them.
4. Click the Apply button to confirm your changes.
Description
Permission for an active query of the SNMP agent for traps is granted.
The SNMP port is called up automatically, (default server 1: 161)
Name of the SNMP user (default: snmp)
Description
Activation of the monitoring via traps
Input of the IP address of the SNMP server in the form "192.168.1.1"
Input of the SNMP port (default server 2: 162)
Select all traps
Notification about a performed switching operation at the Draco MV
Notification about a newly connected console to the Draco MV
Benachrichtigung über eine angeschaltete Konsole
Notification about a removed console from the Draco MV
Notification about a switched-off console
Notification about a change in EDID information at the inputs
Notification about the status of power supply unit #1
Notification about the status of power supply unit #2
Configuration via Management Software
67

Advertisement

Table of Contents
loading

Table of Contents