Launch X-431 PRO GT User Manual page 33

LAUNCH
Tap "Health Report", the system start scanning the ECUs.
Once the scanning is complete, a screen similar to the following appears:
In Fig. 5-11, the tested system with fault code appears in red and the system
with OK displays in black (normally).
On-screen Buttons:
Enter: Tap to enter the diagnostic menus of the current system.
Search: Tap to launch the browser to search for more detailed information
about the current DTC online.
Clear DTC: Tap to clear the existing diagnostic trouble codes.
*Note: Clearing DTCs does not fix the problem(s) that caused the code(s) to be set. If
proper repairs to correct the problem that caused the code(s) to be set are not made,
the code(s) will appear again and the check engine light will illuminate as soon as the
problem that cause the DTC to set manifests itself.
Report: Tap to save it as a diagnostic report.
X-431 PRO GT User Manual
Fig. 5-11
26