Diagnosis; Intelligent Diagnosis - Launch X-431 PRO GT User Manual

LAUNCH

5.1 Intelligent Diagnosis

Through simple Bluetooth communication between the tablet and VCI dongle,
you can easily get the VIN (Vehicle Identification Number) information of the
currently identified vehicle. Once the VIN is successfully identified, the system
will retrieve it from the remote server and then guide you to vehicle information
page without step-by-step manual menu selection.
The vehicle information page lists all historical diagnostic records of the vehicle,
which lets the technician have a total command of the vehicle faults. In addition,
a quick dial to local diagnosis and diagnostic function are also available on this
page for reducing the roundabout time and increasing productivity.
Notes:
• Before using this function, please make sure the VCI dongle is properly connected
to the vehicle's DLC. For detailed connection, see Chapter 4.3.3 "Vehicle
Connection".
• A stable network connection is required for this function.
Follow the steps below to proceed.
Tap "Intelligent Diagnosis" on the Job menu screen to start scanning.
Note: If the VCI dongle is not paired up with the tablet before doing this step, a prompt
message box will appear:
*Note: If the VCI connector is not paired up with the tablet before doing this step, a
prompt message box will appear:

5 Diagnosis

Fig. 5-1
20
X-431 PRO GT User Manual