Comeup GTD-650 Instruction Manual

Comeup GTD-650 Instruction Manual

Heavy duty hoist
Hide thumbs Also See for GTD-650:

Advertisement

Quick Links

Limited One (1) Year Warranty
WARRANTY
Comeup Industries Inc. (COMEUP) warrants to the original purchaser that COMEUP heavy duty
hoist will be free of defects in material and workmanship for a period of one (1) year from the original
date of purchase. All COMEUP mounting kits and other accessories carry a one (1) year limited
warranty against defects in material workmanship.
This warranty applies only to the original purchaser of the hoist. To obtain any warranty service,
the purchaser under this Limited Warranty is requested to advise COMEUP or its authorized
distributors on any claim. The purchaser must provide a copy of the purchase receipt bearing the
hoist serial number, date of purchase, owners name, email or Tel & Fax, address and purchaser
vehicle details. Any products that COMEUP determines to be accountable for defective will be
repaired or replaced or refund at COMEUP sole discretion without charge to buyer upon buyer's
compliance with these procedures. In the event of repair or replace, purchaser must send the
defective hoist or part, with freight prepaid, to COMEUP or its authorized distributor. And COMEUP
will send the serviced product back to purchaser on COMEUP's cost. This warranty does not cover
the removal or reinstallation of the hoist.
COMEUP takes the responsibility for COMEUP hoist parts and components to be free from
defects in materials and workmanship, but the following portions are hereby excluded and
disclaimed. COMEUP or its authorized distributors may make reasonable charges for parts and
labour for repairs or resumption in the following portions not covered by this limited warranty.
(1). All warranties of wire rope assembly after initial use
(2). All warranties of fitness for a particular purpose
(3). All warranties of the product's finish
(4). All warranties of merchantability
The limited warranty does not cover any failure that results from improper installation/operation,
third party part substitution, purchaser's alteration or modification on COMEUP hoist. This warranty
is void when COMEUP serial number plate is removed or defaced.
COMEUP's liability to the purchaser under the hoist purchases for any loss or damage howsoever
and whatsoever arising shall not exceed the price of the initial hoist purchase receipt. COMEUP
shall not in any event be liable to the purchaser for any consequential and/or indirect loss or damage
whether for loss or for profit or otherwise, costs, expenses or other claims for consequential
compensation whatsoever and whether caused by negligence of COMEUP employees, distributors
and their employees or otherwise. COMEUP reserves the right to change product design without
notice. In situations in which COMEUP has changed a product design, COMEUP shall have no
obligation
to
upgrade
or
otherwise
Heavy Duty Hoist
modify
previously
manufactured
products.
2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GTD-650 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Comeup GTD-650

  • Page 1 (1) year from the original date of purchase. All COMEUP mounting kits and other accessories carry a one (1) year limited warranty against defects in material workmanship.
  • Page 2: Safety Requirement

    I. Safety Requirement Heavy Duty Hoist WARNINGS The owner and/or the operator shall have an understanding of these operating instructions and the warning before operating the electrical Thank you for purchasing a Hoist. This manual covers operation and hoist. Failure to follow these warnings may result in loss of load, maintenance of the hoist.
  • Page 3 It is forbidden to  Do connect the  lift loads above power lead on the Handing Precautions the rated main power  Operation Precaution capacity of the source directly * To prevent the risk of electric shock, the power plug must be plugged into a matching outlet hoist and fasten them and grounded in good condition.
  • Page 4: Environment Precautions

     Therefore the correct distance between centre of drum and of should be derived as a fleet angle of 1.5° is the equivalents of approximately 19 cm of lead for each centimetre of overall drum length.For example, the correct distance varies according to drum length. Model GTD-650 GTD-800 GTD-1200 GTD-2200...
  • Page 5 - - - - 272 / 600 - - - - -  Extracts from the EC Directive & Comeup compliance: 362 / 800 - - 1. EN 14492-1 Section 5.15.6 Wire Rope - - 408 / 900 - -...
  • Page 6: Operation

    4). A minimum of five wraps of rope around the drum load is necessary to support the rated load.  Wire Rope Replacement For GTD-650/800/1200 Before installing a new wire/synthetic rope, wrap the end of the wire rope with tape to prevent fraying. Wind the wire rope on the drum by pulling a force to keep the tension constant.
  • Page 7 2. Inspections are dived into Daily, Monthly and Quarterly. 3. Always keep the hoist and accessories free of dirt, oil, grease, water and other substances. It do not require any adjustment for GTD-650/800 at any circumstance. Classification of check For GTD-1200/2200/2800...
  • Page 8: Troubleshooting

    VII. Trouble Shooting When the hoist fails to operate after several attempts, or if there is any fault while Symptom Possible Cause Remedy Cut circuit Check battery lead Recharge or replace battery (at least Weak battery 650CCA) Damaged circuit breaker Replace circuit breaker Hoist will not Bad connection of wirings...

This manual is also suitable for:

Gtd-800Gtd-1200Gtd-2200Gtd-2800

Table of Contents