Do you have a question about the AZIMUT and is the answer not in the manual?
Questions and answers
Tony
April 17, 2025
how do i adjust the door to go down further?
1 comments:
Mr. Anderson
May 9, 2025
To adjust the V2 AZIMUT door to go down further, you need to adjust the chain tension. Use a 10 mm Allen-wrench to tighten or loosen the Allen-head screw until the chain has a distance between 15 and 18 mm, as shown in the installation figure. Ensure the draw slide moves freely along the guide with no friction before proceeding.
24vdc electromechanical actuator for sectional and spring balanced doors up to 2,25 m and counterweight doors up to 2,45 m. maximum area 8 m2 (46 pages)
Need help?
Do you have a question about the AZIMUT and is the answer not in the manual?
Questions and answers
how do i adjust the door to go down further?
To adjust the V2 AZIMUT door to go down further, you need to adjust the chain tension. Use a 10 mm Allen-wrench to tighten or loosen the Allen-head screw until the chain has a distance between 15 and 18 mm, as shown in the installation figure. Ensure the draw slide moves freely along the guide with no friction before proceeding.
This answer is automatically generated