Table of Contents
Advertisement
Available languages
Available languages
IMPORTANT REMARKS
V2 S.p.A. has the right to modify the product without
previous notice; it also declines any responsibility to
damage or injury to people or things caused by improper
use or wrong installation.
PLEASE READ THIS INSTRUCTION MANUAL VERY
CAREFULLY BEFORE INSTALLING AND PROGRAMMING
YOUR CONTROL UNIT.
AUTOMATION MUST BE IMPLEMENTED IN COMPLIANCE
WITH THE EUROPEAN REGULATIONS IN FORCE:
EN 60204-1
EN 12445
EN 12453
12
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the AZIMUT and is the answer not in the manual?
Questions and answers
how do i adjust the door to go down further?
To adjust the V2 AZIMUT door to go down further, you need to adjust the chain tension. Use a 10 mm Allen-wrench to tighten or loosen the Allen-head screw until the chain has a distance between 15 and 18 mm, as shown in the installation figure. Ensure the draw slide moves freely along the guide with no friction before proceeding.
This answer is automatically generated