Empire Comfort Systems DVP20CCKR-1 Installation Instructions

INSTRUCTIONS MUST BE LEFT WITH THE OWNER FOR REFERENCE AFTER INSTALLATION.
DVP20CCKR-1 - For use on Models DVP20CC(30,70)
TOOLS NEEDED:
• 5/16" Nut Driver
INSTRUCTIONS
1. Remove casting top and front from fireplace.
2. Remove glass door from fireplace. Open the two door
clips located on the bottom left and right of glass door.
See Figure 1.
3. Remove logs from fireplace. Place logs in an area
where they will not be broken.
4. Remove inner baffle from fireplace using a 5/16" nut
driver to remove the two screws for DVP20CC and 4
screws for DVP30CC. See Figure 2.
30997-3-0220
INSTALLATION INSTRUCTIONS
Figure 1
Empire Comfort Systems, Inc. • Belleville, IL
MODELS
DVP30CCKR-1 - For use on Models DVP30CC(30,70)
5. Remove rear log support from fireplace using a 5/16"
nut driver. See Figure 3.
(DVP20CC Shown)
Figure 2
Figure 3
Page 1