BMW 84 64 0 025 819 Parts And Accessories Installation Instructions page 16

10. To install and connect the wiring harnesses and switch module
9
A3
E1
Retrofit / Installation kit No. 84 64 0 025 819, 84 64 0 025 882, 84 64 0 025 883, 84 64 0 026 656, 84 64 0 026 657 , 84 64 0 026 658
Issue date: 07 .2000 Installation instructions No. 01 29 0 025 889
13
B9
F 36 0126 M
9
2
D1
F 36 0136 M
The F designations marked with an asterisk
(*) are only valid for this installation and do not
refer to the after-sales service documents.
Insert fuses F1* to F4* (13) into the fuse holder
B9 as shown in the following table:
Fuse Slot
3 A F1*
3 A F2*
1 A F3*
3 A F4*
Insert the fuse holder B9 into the free slot in the
joint connector box on the A pillar on the left.
The figure shows the footwell trim on the
E36/5, proceed accordingly for the other
models.
Connect branches A3, D1 and E1 to the control
module (2) and secure it with cable ties (9).
Tie back surplus lengths of the cables and install
the footwell trim.
Cable colour
red/white and
red/black
red/white and
red/yellow
rviolet/white and
violet/black
violet/white and
violet/yellow
EN/35