Huawei eSight V200R003C00 Hardware Installation Manual page 11

2
Installing the PC server (X3650M4 , X3850X5)
The PC server is heavy, and two or three persons are required to carry the PC server.
Determine the position in the cabinet
for installing the PC server.
Remove the handle bar of the front
panel.
Fix the PC server by using screws.
Install the handle bar of the front
panel.
3 9
Installing the KVM
If the captive nuts for installing rack-
mounting ears are blocked by cables
on the mount angle, remove the cable
tie and adjust the position of the cables.
Then, bind the cables again after the
KVM is installed.
Use the panel screws to fix the rear
mounting point of the KVM to the
square holes on both sides of the
cabinet.
Use the panel screws to fix the front mounting point of the KVM to the square holes on both sides of the cabinet.
10