Table of Contents
Advertisement
Installing the Components Inside the Cabinet
1
1
Flowchart of installing the components inside the cabinet
Start
Determine the position
Remove the filler panels
Install captive nuts
Install component
End
The procedure for installing the captive nut is as follows:
Insert the lower tab of the captive nut into the square hole and hold the captive nut in position.
Insert a flat-head screwdriver through the square hole and place the end of the screwdriver onto the upper tab
of the captive nut.
Use the screwdriver as a lever, and gently but firmly bend the upper tab of the captive nut downwards when
pushing it through the square hole.
Remove the flat-head screwdriver to allow the upper tab to spring into position and release your hand. The
assembly is complete.
Take care not to stab fingers with screwdriver.
1
3
9
9
2
4
Advertisement
Table of Contents
