Replacing The Grass Deflector - Toro ProLine 44410TE Operator's Manual

Figure 77
1. Adjustment bolt
7. Ensure that the chains are taut and tighten the
bolts.
8. Check the side-to-side level and the front-to-rear
pitch; refer to Checking the Side-to-Side Level
(page 48) and Checking the Mower Deck
Front-to-Rear Pitch (page
g300452
49).
Replacing the Grass
Deflector
Service Interval: Before each use or daily—Inspect
the grass deflector for damage.
WARNING
An uncovered discharge opening could allow
the machine to throw objects toward you or
bystanders, resulting in serious injury. Also,
contact with the blade could occur.
Never operate the machine unless you install
a mulch plate, discharge deflector, or grass
collection system.
1. Disengage the spring from the notch in the
deflector bracket and slide the rod out of the
welded deck brackets, spring, and discharge
deflector (Figure
1. Rod
2. Deflector
3. Spring
2. Remove the damaged or worn discharge
deflector.
50
78).
Figure 78
4. Deck brackets
5. Hairpin cotter
6. Spring installed over the
rod
g302010