Maintenance; Maintenance Safety; Recommended Maintenance Schedule(S) - Toro ProLine 44410TE Operator's Manual

Maintenance

Note:
Determine the left and right sides of the machine from the normal operating position.

Maintenance Safety

•
Before adjusting, cleaning, servicing, or leaving
the machine, do the following:
– Park the machine on a level surface.
– Move the throttle switch to the low-idle position.
– Disengage the cutting units.
– Ensure that the transmission is in neutral.
– Engage the parking brake.
– Shut off the engine and remove the key.
– Wait for all moving parts to stop.
– Allow machine components to cool before
performing maintenance.
•
Do not allow untrained personnel to service the
machine.
•
If the engine must be running to perform a
maintenance adjustment, keep your hands, feet,
clothing, and any parts of the body away from the

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 8 hours
After the first 50 hours
After the first 100 hours
Before each use or daily
Every 25 hours
Every 50 hours
Every 100 hours
Every 200 hours
Maintenance Procedure
• Change the engine oil.
• Change the hydraulic-system filters and fluid.
• Check the wheel-lug nuts.
• Check the safety-interlock system.
• Check the engine-oil level.
• Clean the air-intake screen.
• Clean the grass and debris from the air-intake screen.
• Test the parking brake.
• Inspect the blades.
• Inspect the grass deflector for damage.
• Clean the mower deck.
• Grease the caster wheel bearings.
• Clean the foam air-cleaner element.
• Check the belts for wear or cracks.
• Check the paper air-cleaner element.
• Check the hydraulic fluid.
• Change the engine oil.
• Check, clean and gap the spark plug.
• Check the battery.
• Check and clean the engine-cooling fins and shrouds.
• Replace the paper air-cleaner element.
• Change the engine-oil filter.
cutting unit, attachments, and any moving parts.
Keep bystanders away.
•
Keep all parts in good working condition. Replace
all worn, damaged, or missing parts and decals.
Keep all fasteners tight to ensure that the machine
is in safe working condition.
•
Check the grass catcher components frequently
and replace them when they are worn or damaged.
•
Clean grass and debris from the cutting unit,
drives, muffler, cooling screen, and the engine to
help prevent fires. Clean up oil or fuel spills.
•
Check the brake operation frequently. Adjust and
service the brake as needed.
•
Carefully release pressure from components with
stored energy.
•
To ensure safe, optimal performance of the
machine, use only genuine Toro replacement
parts. Replacement parts made by other
manufacturers could be dangerous, and such use
could void the product warranty.
22