Page 3
15 amps. Your electrician must furnish sufficient current for the proper operation of your machine. We recommend that this machine be fused on a line by itself. The switches and controls which operate the warmer are located on the lower left (2343EX, 2344EX) or the bottom right (2345EX) of the machine.
Page 4
(Model 2345EX). HEAT CONTROL The machine comes with either (1) variable heat control (2343EX and 2344EX) or (2) variable heat controls (2345EX). These controls are marked OFF to 160 degrees. The left heat control operates the left heat element (2343EX, 2344EX, 2345EX) and the right heat control operated the right heat element (2345EX).
1. Address all parts orders to: Parts Department Gold Medal Products Co. 10700 Medallion Drive Cincinnati, Ohio 45241-4807 or, place orders at: (513) 769-7676 (800) 543-0862 Fax: (513) 769-8500 2343EX, 234EX and 2345EX DROP IN WARMER...
Page 6
36” Door Weldment 39301 48” Door Weldment 39398 30” Main Body Weldment 39310 36” Main Body Weldment 39311 48” Main Body Weldment 39390 30” Top Glass 39312 36” Top Glass 48” Top Glass 2343EX, 2344EX and 2345EX DROP IN WARMER...
Page 7
Heat Control 87429 Heat Control 87430 87430 Knob Heat Control 87430 Knob Heat Control 41057 Light Tube 39016 Light Tube 41507 Light Tube 41722 41722 Ballast 41510 Ballast 41023 41023 Starter 41508 Starter 2343EX, 2344EX AND 2345EX DROP IN WARMER...
Page 8
This is for Models 2343EX AND 2344EX 2343EX, 2344EX and 2345EX DROP IN WARMER...
Page 9
FOR MODEL 2345EX 2343EX, 2344EX AND 2345EX DROP IN WARMERS...
WARRANTY WE WARRANT to the original purchaser the Gold Medal equipment sold by us to be free from defects in material or workmanship under normal use and service. Our obligation under this warranty shall be limited to the repair or replacement of any...
Need help?
Do you have a question about the 2343EX and is the answer not in the manual?
Questions and answers