Overview - Kramer 610T User Manual

3

Overview

The 610T and 610R are a detachable optical transmitter and receiver pair for
sending DVI signals with resolutions of up to 1920x1200 at 60Hz over LC optical
cable. The 610T attaches to the transmitter side of a fiber optical cable and the
610R connects to the receiver end and both are sold as a set.
The 610T and 610R feature:

A maximum data rate of 4.95Gbps (1.65Gbps per graphic channel)

Inputs: DVI-D on a DVI-I connector (610T); 4 LC optical connectors for R, G,
B & clock (610R)

Outputs: 4 LC optical connectors for R, G, B & clock (610T); DVI-D on a DVI-
I connector (610R)

Laser standards compliance - IEC 60825-1, FDA 21CFR1040;
Laser Class 1: Safety of laser products

No EMI/RFI

HDTV Compatibility

No HDCP Compliance

A system range of up to 400m (1312ft)

EDID capture that copies and stores the EDID from a display device (610T)

Multi-mode fiber optic cable with 4 simplex or 2 duplex LC fiber connectors

Compliance with the limits for a Class A digital device, pursuant to part 15
and 2 of FCC and CE

External power adapter (supplied) or 5V DC from source

NanoTools size
The Kramer 610T can be powered either by an external power adapter or
internally by the 5V pin on the DVI card of the computer. The 610T automatically
detects if it is being powered via the external power adapter, and if so, the internal
power supply is cut off. The 610R module must always be powered by the power
adapter. Most laptops require that the external power adapter is used for the
transmitter.
4 610T, 610R - Overview