Fluke Professional Series User Manual page 28

Ti300 PRO, Ti400 PRO, Ti401 PRO Ti450 PRO, Ti450 SF6, Ti480 PRO
Users Manual
Option Menu
Auto Capture
Wireless
24
Find Quality Products Online at:
Table 12. Camera Menu (cont.)
Option
Select to capture and save an infrared image, or series of images
Start Capture
based on Auto Capture settings.
Sets the number of hours, minutes, or seconds between image
captures.
Interval
The minimum interval available can be affected by the file type
and visible light camera settings. Some combinations create
larger file sizes that take longer to capture and save and create a
higher minimum interval compared to others.
Sets a number of images to capture. Or, select Maximum Memory
Image Count to capture and save images until the chosen storage memory is full or
the battery runs out of power.
Select to immediately capture images when Start Capture is
Manual Trigger
selected.
Select to capture images when a value is above or below a set
Temp Trigger
temperature limit when Start Capture is selected.
With Temp Trigger selected, set the temperature and conditions to
Set Temp Trigger
trigger the auto capture of images.
Uses Bluetooth technology to connect the Imager to a device such as
Bluetooth
a wireless headset. See
Uses the Imager to create a wireless Hotspot when no WiFi network
WiFi Hotspot
exists. See
Connects the Imager to a WiFi network so you can sign into your
WiFi Network
Fluke Connect account on the Imager. See
GlobalTestSupply
www.
Description
Note
Wireless Connectivity.
Wireless Connectivity.
.com
Wireless Connectivity.
sales@GlobalTestSupply.com