Fluke Professional Series User Manual page 25

Option
MultiSharp Focus
MultiSharp Focus (In PC
Only)
SuperResolution
SuperResolution (In PC
Only)
MultiSharp Focus
MultiSharp Focus captures several images focused on multiple targets that are positioned at different distances
from the Imager and creates one image that focuses on the multiple targets at the same time.
The minimum focus distance with MultiSharp Focus and a standard lens is 15 cm (6 inches). For
optimum performance, position the camera
also works with all compatible lenses.
To use:
1. Point the Imager at the target.
2. Capture an image. Hold the Imager still while it captures the images.
Saving... shows on the display for ∼2 seconds for a 60 Hz model or 5 seconds for a 9 Hz model.
Find Quality Products Online at:
Table 11. Image Enhancement Menu (cont.)
MultiSharp Focus captures several images focused on multiple targets that are
positioned at different distances from the Imager and creates one image that
focuses on the multiple targets at the same time.
In MultiSharp Focus mode, you can process the image in the camera or in
SmartView software.
In MultiSharp Focus (In PC only) mode, the image is not processed on the Imager
so you cannot view the image on the Imager. Use SmartView software to view the
image on your PC. Set the file format to .is2 for MultiSharp Focus (In PC only)
mode to work.
SuperResolution uses a sensor to capture micro movements to create an image
with double the resolution. See
based on the model of the Imager.
In SuperResolution mode, the Imager captures the data and processes the
image.
In SuperResolution (in PC only) mode, the image is not processed on the Imager
so you cannot view the image on the Imager. Use SmartView software to view the
image on your PC.
Note
≥
23 cm (9 inches) from the closest target. MultiSharp Focus
GlobalTestSupply
www.
Professional Series Thermal Imagers
Description
Detailed Specifications the resolution available
.com
sales@GlobalTestSupply.com
Menus
21