Table of Contents
Advertisement
Quick Links
®
FE-3 Screen + Table
1.
Fix the Connection Brackets to the Straight and Corner Bracket
by tightening two M6 screws each as shown
configuration.
Loosen the set screws but do not remove it.
2. Remove both Add-on FE-3 screen bottom caps.
Corner Bracket
Loosen Set
screws
Connection
Bracket
May 2009
Assembly Instruction - Add-on 800/1000H FE-3 Screen on One Side
Straight Bracket
1
Loosen Set
screws
FRAMEONE
of 90 Degree Table
Add-on
FE-3
Screen
2
Page 1 of 6
Advertisement
Table of Contents
Related Manuals for Steelcase FRAMEONE FE-3
Summary of Contents for Steelcase FRAMEONE FE-3
- Page 1 FRAMEONE ® Assembly Instruction - Add-on 800/1000H FE-3 Screen on One Side of 90 Degree Table FE-3 Screen + Table Add-on Fix the Connection Brackets to the Straight and Corner Bracket FE-3 by tightening two M6 screws each as shown Screen configuration.
- Page 2 FRAMEONE ® Assembly Instruction - Add-on 800/1000H FE-3 Screen on One Side of 90 Degree Table FE-3 Screen + Table Slide the Straight Bracket into the side slot of the FE-3 Screen as shown. 4. Slide the Corner Screen Bracket into the other side slot of the FE-3 Screen as shown.
- Page 3 FRAMEONE ® Assembly Instruction - Add-on 800/1000H FE-3 Screen on One Side of 90 Degree Table H800 (H771) FE-3 Screen FE-3 Screen + Table Refer to the diagram on the right to define the desired height for the screen. 7. Align the middle Set Screw to the desired Screen Height H1080 H1175 H1270...
- Page 4 FRAMEONE ® Assembly Instruction - Add-on 800/1000H FE-3 Screen on One Side of 90 Degree Table Corner Bracket FE-3 Screen + Table 8. Unscrew the corner bracket’s M6 screws of the installed screen and remove both rectangular plates. Straight Bracket 9.
- Page 5 FRAMEONE ® Assembly Instruction - Add-on 800/1000H FE-3 Screen on One Side of 90 Degree Table FE-3 Screen + Table 10. Tighten two M6 screws with its rectangular plate on the straight bracket as shown. Make sure it is fixed securely. 11.
- Page 6 FRAMEONE ® Assembly Instruction - Add-on 800/1000H FE-3 Screen on One Side of 90 Degree Table FE-3 Screens + Table 12. View of the completed installation of FE-3 Screens to a FrameOne 90 degree table. Page 6 of 6 May 2009...
Need help?
Do you have a question about the FRAMEONE FE-3 and is the answer not in the manual?
Questions and answers