Advertisement
Quick Links
®
FE-3 Screen Bracket + Bench
1.
Slides out all the desktops and open
up space in the middle of the Bench
for Screen Bracket installation.
2.
Install Bracket and Washer Plate to
Bench connector by M6 Bolts.
1
September 2008
Assembly Instruction - FE-3 Screen and Bracket for Bench
2
FRAME ONE BENCH
Bracket
Bolt
Washer Plate
Page 1 of 7
Advertisement
Related Manuals for Steelcase FE-3
Summary of Contents for Steelcase FE-3
- Page 1 FRAME ONE BENCH ® Assembly Instruction - FE-3 Screen and Bracket for Bench FE-3 Screen Bracket + Bench Slides out all the desktops and open up space in the middle of the Bench for Screen Bracket installation. Install Bracket and Washer Plate to Bench connector by M6 Bolts.
- Page 2 FRAME ONE BENCH ® Assembly Instruction - FE-3 Screen and Bracket for Bench FE-3 Screen Bracket + Bench Tapping Screw Place Screen End Block to the side frame. Screen End Block 3B. Align to the middle hole at the side frame.
- Page 3 FRAME ONE BENCH ® Assembly Instruction - FE-3 Screen and Bracket for Bench FE-3 Screen Bracket + Bench Secure the Screen End Block to the connector from the bottom by using M6 bolts. Repeat Step 2 to 4 for the other Screen End Block at another end of the Bench.
- Page 4 FRAME ONE BENCH ® Assembly Instruction - FE-3 Screen and Bracket for Bench FE-3 Screen Bracket + Bench Repeat Step 2 at both connectors at the middle of the bench. Place the Screen Middle Block on both middle connectors and align holes to the brackets.
- Page 5 FRAME ONE BENCH ® Assembly Instruction - FE-3 Screen and Bracket for Bench FE-3 Screen Bracket + Bench Secure the Screen Middle Block by using four M6 bolts from the bottom. Page 5 of 7 September 2008...
- Page 6 FRAME ONE BENCH ® Assembly Instruction - FE-3 Screen and Bracket for Bench FE-3 Screen + Bench Align Screen Axle and slot FE-3 Screen to the Screen Blocks. Secure FE-3 Screen by countersunk screws both ends. Page 6 of 7...
- Page 7 FRAME ONE BENCH ® Assembly Instruction - FE-3 Screen and Bracket for Bench FE-3 Screen + Bench Secure FE-3 Screen to Middle Screen Block by M6 bolts. Slide back all the desktops and lock them. Page 7 of 7 September 2008...
Need help?
Do you have a question about the FE-3 and is the answer not in the manual?
Questions and answers