Steelcase FRAMEONE FE-3 Assembly Instructions Manual
  1. Manuals
  2. Brands
  3. Steelcase Manuals
  4. Indoor Furnishing
  5. FRAMEONE FE-3
  6. Assembly instructions manual
Steelcase FRAMEONE FE-3 Assembly Instructions Manual

Steelcase FRAMEONE FE-3 Assembly Instructions Manual

800/1000h screen on one side of 90 degree table
Hide thumbs
1
2
3
4
5
6

Advertisement

Table of Contents

®
FE-3 Screen (Left Hand) + Table
1.

Fix the Connection Brackets to the Straight and Corner Bracket

by tightening two M6 screws each as shown
configuration.
Loosen the set screws but do not remove it.

2. Remove both FE-3 screen bottom caps.

Corner Bracket
Loosen Set
screws
Connection
Bracket
May 2009
Straight Bracket
1
Loosen Set
screws
Assembly Instruction - 800/1000H FE-3 Screen on One Side
FE-3
Screen
2
FRAMEONE
of 90 Degree Table
Page 1 of 6

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FRAMEONE FE-3 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Steelcase FRAMEONE FE-3

Summary of Contents for Steelcase FRAMEONE FE-3

  • Page 1 ® FRAMEONE Assembly Instruction - 800/1000H FE-3 Screen on One Side of 90 Degree Table FE-3 Screen (Left Hand) + Table Fix the Connection Brackets to the Straight and Corner Bracket FE-3 Screen by tightening two M6 screws each as shown configuration.
  • Page 2 FRAMEONE ® Assembly Instruction - 800/1000H FE-3 Screen on One Side of 90 Degree Table FE-3 Screen (Left Hand) + Table Slide the Straight Bracket into the side slot of the FE-3 Screen as shown. 4. Slide the Corner Screen Bracket into the other side slot of the FE-3 Screen as shown.
  • Page 3 FRAMEONE ® Assembly Instruction - 800/1000H FE-3 Screen on One Side of 90 Degree Table H800 (H771) FE-3 Screen FE-3 Screen (Left Hand) + Table Refer to the diagram on the right to define the desired height for the screen. 7.
  • Page 4 FRAMEONE ® Assembly Instruction - 800/1000H FE-3 Screen on One Side of 90 Degree Table FE-3 Screen (Left Hand) + Table Remove the support bracket shown. Corner 9. Position the FE-3 screen to the table. Bracket The screen bracket should be attached to the understructure of the table.
  • Page 5 FRAMEONE ® Assembly Instruction - 800/1000H FE-3 Screen on One Side of 90 Degree Table FE-3 Screen (Left Hand) + Table 10. Tighten two M6 screws to the Straight Bracket through the rectangular plate. Make sure it is tightly secured. 11.
  • Page 6 FRAMEONE ® Assembly Instruction - 800/1000H FE-3 Screen on One Side of 90 Degree Table FE-3 Screen (Left Hand) + Table 12. View of the completed installation of FE-3 Screen to a FrameOne 90 degree table. FE-3 Screen Corner Bracket View Straight Bracket View...

Table of Contents