Netum C Series Manual page 4

Get Started: Plug the USB dongle on your computer. If you use US keyboard,
Working Via USB Dongle (Wireless Mode)
it's plug and play. If you use other type of keyboard , please refer to
"keyboard language" to con�igure the keyboard language before use it.
Get Started: Scan "Working via Bluetooth",pairing the bluetooth. US Keyboard
Working Via Bluetooth
is set by default if you use other types of keyboard please con�igure keyboard
language before you use it.
• Make sure the device is in range with Bluetooth turned on.
Important Notes:
• Pressing the scan button will initiate the attempts to connect.
• If a connection is made, the blue light will stop blinking and turn solid.
• If a connection is not made after several attempts, the scanner will
emit a long beep (and the blue light will turn off).
• Bluetooth working channel is not set by default.If you want to work via
bluetooth, you have to scan command barcode of "Working via bluetooth"
before pairing. If you want to shift from bluetooth working channel to RF
Wireless channel, you have to scan " RF Wireless Transmit" then plug the USB
receiver into your device.
%#IFSN0$1
*Wireless Transmit
%#IFSNO$4
Working via Bluetooth
(3)