Netum NT-1228BL Manual

Quick setup manual (14 pages)

Setup manual (36 pages)

Quick setup manual (13 pages)

Table of Contents

Quick Links

Contents

Firmware Version ....................................................................................................................................... - 1 -

Barcode Programming ............................................................................................................................... - 1 -

Connection Way ......................................................................................................................................... - 1 -

Working via USB Cable ....................................................................................................................... - 1 -

Working via 2.4G receiver .................................................................................................................. - 1 -

Working via Bluetooth ....................................................................................................................... - 1 -

Connection Modes: .................................................................................................................................... - 2 -

Wired Connection .............................................................................................................................. - 2 -

USB HID-KBW ............................................................................................................................. - 2 -

USB COM Port Emulation ........................................................................................................... - 2 -

RF Wireless Connection. .................................................................................................................... - 2 -

*RF DONGLE HID-KBW ............................................................................................................... - 2 -

RF DONGLE AS VIRTUAL COM .................................................................................................... - 2 -

Bluetooth Connection ........................................................................................................................ - 3 -

Basic Mode (HID) (default) ......................................................................................................... - 3 -

How to pair bluetooth under Basic Mode (HID) ? .................................................................... - 3 -

Bluetooth keyboard Upload Speed ........................................................................................... - 3 -

BLE Mode ................................................................................................................................... - 4 -

SPP Mode ................................................................................................................................... - 4 -

Keyboard Language .................................................................................................................................... - 5 -

DATA UPLOADING MODE .......................................................................................................................... - 7 -

Quit Offline Mode .............................................................................................................................. - 7 -

Offline Mode ...................................................................................................................................... - 7 -

Output Stored Data ............................................................................................................................ - 7 -

Output Total Entry ............................................................................................................................. - 7 -

Clear Memory .................................................................................................................................... - 7 -

Get Battery Volume ................................................................................................................................... - 8 -

Idle time ..................................................................................................................................................... - 8 -

Convert Case .............................................................................................................................................. - 8 -

Terminator ................................................................................................................................................. - 9 -

IOS Keyboard POP UP/HIDE ....................................................................................................................... - 9 -

Beeper ........................................................................................................................................................ - 9 -

Restore factory default ............................................................................................................................ - 10 -

Transmit Code ID Character ..................................................................................................................... - 11 -

Symbol Code ID Identifiers ............................................................................................................... - 11 -

AIM Code Identifiers ........................................................................................................................ - 11 -

All Symbologies ........................................................................................................................................ - 12 -

1D Symbologies ................................................................................................................................ - 12 -

2D Symbologies ................................................................................................................................ - 13 -

1D Inverse Barcode ......................................................................................................................... - 13 -

Decode UPC/EAN Supplementals UPC/EAN .................................................................................... - 14 -

UPC-A ............................................................................................................................................... - 14 -

Enable/Disable UPC-A .............................................................................................................. - 14 -

Transmit Preamble Character .................................................................................................. - 15 -

UPC-A Transmit Check Character ............................................................................................. - 15 -

UPC-A Add-On Code ................................................................................................................. - 15 -

UPC-A Add-On Code Required ................................................................................................. - 16 -

UPC-E................................................................................................................................................ - 16 -

Enable/Disable UPC-E .............................................................................................................. - 16 -

NT-1228BL Manual

V20.1.2

Table of Contents

Summary of Contents for Netum NT-1228BL

Page 1: Table Of Contents
V20.1.2 NT-1228BL Manual Contents Firmware Version ............................- 1 - Barcode Programming ..........................- 1 - Connection Way ............................- 1 - Working via USB Cable ........................- 1 - Working via 2.4G receiver ........................- 1 - Working via Bluetooth ........................- 1 - Connection Modes: ............................
Page 2 Transmit Preamble Character ....................- 17 - UPC-E Transmit Check Character ..................... - 17 - Convert UPC-E to UPC-A ......................- 17 - UPC-E Add-On Code ......................... - 17 - UPC-E Add-On Code Required ....................- 18 - EAN-8 ............................... - 18 - Enable/Disable EAN-8 ......................
Page 3 Code 11 Check Digit Verification ....................- 31 - Transmit Code 11 Check Digits ....................- 32 - Interleaved 2 of 5/ITF ........................- 32 - Enable/Disable Interleaved 2 of 5 .................... - 32 - Set Lengths for Interleaved 2 of 5 .................... - 33 - One Discrete Length ........................
Page 4 GS1 DataBar/RSS ..........................- 47 - Enable/Disable GS1 DataBar-14 ....................- 47 - Enable/Disable GS1 DataBar Limited ..................- 47 - Enable/Disable GS1 DataBar Expanded ................... - 48 - PDF417 ............................. - 48 - Enable/Disable PDF417 ......................- 48 - PDF 417 Twin Code ........................
Page 5: Firmware Version
Firmware Version Barcode Programming Netum barcode scanners are factory programmed for the most common terminal and communications settings. If you need to change these settings, programming is accomplished by scanning the bar codes in this guide. An asterisk (*) next to an option indicates the default setting.
Page 6: Connection Modes
②Pair the bluetooth. Please refer to the “bluetooth pairing” Page 3. ④Set keyboard language. US Keyboard by default if you use other types of keyboard please configure keyboard language before you use it. ⑤ Locate cursor on the place where you want the data to be displayed then you can start to scan. Working via Bluetooth Connection Modes: Wired Connection...
Page 7: Bluetooth Connection
3. Make sure the device has Bluetooth “On”. 4. In the list of found devices, select “Netum Bluetooth”. Tap Pair. 5. The scanner will make one long beep after bluetooth paired and LED light will turn to solid blue (no blinking).
Page 8: Ble Mode
If you want to shift from HID to SPP or BLE just scan the Corresponding command barcode. If you want to shift from SPP or BLE to HID mode, please ignore (or delete) "Netum Bluetooth"→ turn off bluetooth→ scan command barcode of HID→ Open the bluetooth → repair it.
Page 9: Keyboard Language
Keyboard Language For example If you use French Keyboard, scan command barcode of “French keyboard ”. If you use a US keyboard you can ignore this step. * America EN keyboard French keyboard Germany keyboard Italy keyboard Portugal keyboard Spain keyboard Turkey Q keyboard Turkey F keyboard UK keyboard...
Page 10 Brazil PT keyboard Canadian FR keyboard Croatia keyboard Slovak keyboard Denmark keyboard Finland keyboard Latin-America ES keyboard Netherland keyboard Norway keyboard Poland keyboard Serbia keyboard Slovenia keyboard - 6 -...
Page 11: Data Uploading Mode
Sweden keyboard Swiss DE keyboard DATA UPLOADING MODE If you are heading for a working area which lies outside the Bluetooth signal range, you may activate scanner’s store mode, following steps described below. Under this mode, all scanned data will be stored directly into the buffer memory of the device.
Page 12: Get Battery Volume
Clear Memory Get Battery Volume Scan below command barcode to get battery rough volume Battery Rough Volume Idle time Scanner will turn to sleep after idle/inactive for 1min Scan "Disable module Idle time" before you doing any other setup from this section. Power Off Disable Sleep Mode 3Mins...
Page 13: Terminator
All Upper Case (a->A) All Lower Case (A->a) Notes: Command barcodes from Working mode section are only applied for Bluetooth wireless mode, Terminator The scanner provides a shortcut for setting the terminating character suffix to CR or CRLF and enabling it by scanning the appropriate barcode below.
Page 14: Restore Factory Default
BEEP OFF *High Volume Middle Volume Low Volume Restore factory default Scanning the following barcodes one by one to restore the scanner to factory defaults. (Four steps included) 1. Factory Restore 2. Serial Port 3. Baud Rate 19200 4. Enter+LF - 10 -...
Page 15: Transmit Code Id Character
Transmit Code ID Character A code ID character identifies the code type of a scanned bar code. This can be useful when decoding more than one code type. The code ID character is inserted between the prefix character (if selected) and the decoded symbol.
Page 16: All Symbologies
m= Modifier Character Table 4-4 A Code 39, Code 39 Full ASCII, Code 32 Discrete 2 of 5, IATA 2 of 5 Code 128, ISBT 128, GS1-128, Code 39 Trioptic, Bookland EAN, Han Xin Coupon (Code 128 portion), Setup128 UPC/EAN, Coupon (UPC portion) GS1 DataBar Codabar PDF417...
Page 17: 1D Inverse Barcode
Enable 1D Symbologies 2D Symbologies Enable/Disable 2D Symbologies If the Disable 2D Symbologies feature is enabled, the scanner will not be able to read any 2D barcodes. Disable 2D Symbologies Enable 2D Symbologies 1D Inverse Barcode Regular barcode: Dark image on a bright background. Inverse barcode: Bright image on a dark background.
Page 18: Decode Upc/Ean Supplementals Upc/Ean
Decode UPC/EAN Supplementals UPC/EAN Supplementals are bar codes appended according to specific format conventions (e.g.UPC A+2, UPC E+2, EAN 13+2, EAN 13+5). The following options are available: *Ignore UPC/EAN with Supplementals Decode UPC/EAN with Supplementals Auto discriminate UPC/EAN Supplementals UPC-A Enable/Disable UPC-A To enable or disable UPC-A, scan the appropriate bar code below.
Page 19: Transmit Preamble Character
Disable UPC-A Transmit Preamble Character Preamble characters (Country Code and System Character) can be transmitted as part of a UPC-A barcode. Select one of the following options for transmitting UPC-A preamble to the host device: transmit system character only or transmit system character and country code (“0” for USA). No System Character System Character &...
Page 20: Upc-A Add-On Code Required
Enable 2-Digit Add-On Code *Disable 2-Digit Add-On Code Enable 5-Digit Add-On Code Disable 5-Digit Add-On Code UPC-A Add-On Code Required When UPC-A Add-On Code Required is selected, the scanner will only read UPC-A barcodes that contain add- on codes. UPC-A Add-On Code Required * UPC-A Add-On Code Not Required UPC-E Enable/Disable UPC-E...
Page 21: Transmit Preamble Character
Transmit Preamble Character Preamble characters (Country Code and System Character) can be transmitted as part of a UPC-E barcode. Select one of the following options for transmitting UPC-E preamble to the host device: transmit system character only or transmit system character and country code (“0” for USA). No System Character System Character &...
Page 22: Upc-E Add-On Code Required
Enable 2-Digit Add-On Code *Disable 2-Digit Add-On Code Enable 5-Digit Add-On Code Disable 5-Digit Add-On Code UPC-E Add-On Code Required When UPC-E Add-On Code Required is selected, the scanner will only read UPC-E barcodes that contain add- on codes. UPC-E Add-On Code Required * UPC-E Add-On Code Not Required EAN-8 Enable/Disable EAN-8...
Page 23: Ean-8 Extension
EAN-8 Extension Disable EAN-8 Zero Extend: Transmit EAN-8 barcodes as is. Enable EAN-8 Zero Extend: Add five leading zeros to decoded EAN-8 barcodes to extend to13 digits. Enable EAN-8 Zero Extend *Disable EAN-8 Zero Extend EAN-8 Add-On Code A EAN-8 barcode can be augmented with a two-digit or five-digit add-on code to form a new one. Enable 2-Digit Add-On Code/ Enable 5-Digit Add-On Code: The scanner decodes a mix of EAN-8 barcodes with and without 2-digit/5-digit add-on codes.
Page 24: Enable/Disable Ean-13
EAN-8 Transmit Check Character Transmit EAN-8 Check Character Do Not Transmit EAN-8 Check Character EAN-13 Enable/Disable EAN-13 To enable or disable EAN-13, scan the appropriate bar code below. *Enable EAN-13 Disable EAN-13 EAN-13 Add-On Code A EAN-13 barcode can be augmented with a two-digit or five-digit add-on code to form a new one. Enable 2-Digit Add-On Code/ Enable 5-Digit Add-On Code: The scanner decodes a mix of EAN-13 barcodes with and without 2-digit/5-digit add-on codes.
Page 25: Bookland Ean(Isbn)
Enable 5-Digit Add-On Code Disable 5-Digit Add-On Code EAN-13 Add-On Code Required When EAN-13 Add-On Code Required is selected, the scanner will only read EAN-13 barcodes that contain add-on codes. EAN-13 Add-On Code Required *EAN-13 Add-On Code Not Required EAN-13 Transmit Check Character Transmit EAN-13 Check Character Do Not Transmit EAN-13 Check Character Bookland EAN(ISBN)
Page 26: Bookland Isbn
*Disable Bookland EAN Bookland ISBN Enable/Disable ISBN To enable or disable Bookland ISBN, scan the appropriate bar code below. *Bookland ISBN-10 Bookland ISBN-13 Code 128 Enable/Disable Code 128 To enable or disable Code 128, scan the appropriate bar code below. *Enable Code 128 Disable Code 128 - 22 -...
Page 27: Code128 Transmit Check Character
Code128 Transmit Check Character Transmit Code128 Check Character * Do Not Transmit Code128 Check Character GS1-128 (UCC/EAN-128) Enable/Disable GS1-128 (UCC/EAN-128) To enable or disable GS1-128, scan the appropriate bar code below. *Enable GS1-128 Disable GS1-128 GS1-128 Transmit Check Character Transmit GS1-128 Check Character * Do Not Transmit GS1-128 Check Character ISBT 128 Enable/Disable ISBT 128...
Page 28: Code39
*Enable ISBT 128 Disable ISBT 128 Code39 Enable/Disable Code 39 To enable or disable Code 39, scan the appropriate bar code below. *Enable Code 39 Disable Code 39 Set Length Range for Code39 The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains.
Page 29: Two Discrete Lengths
Code 39 - One Discrete Length Two Discrete Lengths This option limits decodes to only those Code 39 symbols containing either of two selected lengths. Lengths are selected from the Numeric Bar Codes in appendix. For example, to decode only those Code 39 symbols containing either 2 or 14 characters, select Code 39 - Two Discrete Lengths, then scan 0, 2, 1, and then 4.
Page 30: Transmit Code 39 Check Digit
Verify Code 39 Check Digit *Do Not Verify Code 39 Check Digit Transmit Code 39 Check Digit Scan this symbol to transmit the check digit with the data. Transmit Code 39 Check Digit (Enable) Scan this symbol to transmit data without the check digit. *Do Not Transmit Code 39 Check Digit Enable/Disable Code 39 Full ASCII Code 39 Full ASCII is a variant of Code 39 which pairs characters to encode the full ASCII character set.
Page 31: Code39 Transmit Start/Stop Character
*Disable Code 39 Full ASCII NOTE Trioptic Code 39 and Code 39 Full ASCII cannot be enabled simultaneously. If you get an error beep when enabling Code 39 Full ASCII, disable Trioptic Code 39 and try again. Code39 Transmit Start/Stop Character Transmit Start/Stop Character Do not Transmit Start/Stop Character Code 32...
Page 32: Set Lengths For Code93
Enable Code 93 *Disable Code 93 Set Lengths for Code93 The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains. Lengths for Code 93 may be set for any length, one or two discrete lengths, or lengths within a specific range.
Page 33: Length Within Range
Length Within Range This option sets the unit to decode a code type within a specified range. For example, to decode Code 93 symbols containing between 4 and 12 characters, first scan Code 93 Length Within Range, then scan 0, 4, 1 and 2 (single digit numbers must always be preceded by a leading zero).
Page 34: Code 11
Transmit Code 93 Check Digit (Enable) *Do Not Transmit Code 93 Check Digit Code 11 Enable/Disable Code 11 To enable or disable Code 11, scan the appropriate bar code below. Enable Code 11 *Disable Code 11 Set Lengths for Code 11 The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains.
Page 35: Two Discrete Lengths
Two Discrete Lengths Select this option to decode only Code 11 symbols containing either of two selected lengths. Select lengths using the Numeric Bar Codes in appendix. For example, to decode only those Code 11 symbols containing either 2 or 14 characters, select Code 11 - Two Discrete Lengths, then scan 0, 2, 1, and then 4.
Page 36: Transmit Code 11 Check Digits
Enable One Check Digit Enable Two Check Digits Transmit Code 11 Check Digits Transmit Code 11 Check Digit(s) (Enable) *Do Not Transmit Code 11 Check Digit(s) (Disable) Interleaved 2 of 5/ITF Enable/Disable Interleaved 2 of 5 To enable or disable Interleaved 2 of 5, scan the appropriate bar code below. *Enable Interleaved 2 of 5 - 32 -...
Page 37: Set Lengths For Interleaved 2 Of 5
Disable Interleaved 2 of 5 Set Lengths for Interleaved 2 of 5 The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains. Lengths for I 2 of 5 may be set for any length, one or two discrete lengths, or lengths within a specific range.
Page 38: Any Length
Any Length Scan this option to decode I 2 of 5 symbols containing any number of characters. NOTE Selecting this option may lead to misdecodes for I 2 of 5 codes I 2 of 5 - Any Length I 2 of 5 Check Digit Verification Verify I 2 of 5 Check Digit *Do Not Verify I 2 of 5 Check Digit Transmit I 2 of 5 Check Digit...
Page 39: Itf14
ITF14 Enable/Disable ITF14 To enable or disable ITF14, scan the appropriate bar code below. Enable ITF14 *Disable ITF14 Transmit ITF14 Check Digit Transmit ITF14 Check Digit (Enable ) *Do Not Transmit ITF14 Check Digit Discrete 2 of 5/Industrial 2 of 5/IND25 Enable/Disable Discrete 2 of 5 To enable or disable Discrete 2 of 5, scan the appropriate bar code below.
Page 40: Set Lengths For Discrete 2 Of 5
*Disable Discrete 2 of 5 Set Lengths for Discrete 2 of 5 The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains. Lengths for D 2 of 5 may be set for any length, one or two discrete lengths, or lengths within a specific range.
Page 41: Any Length
Any Length Scan this option to decode D 2 of 5 symbols containing any number of characters. NOTE Selecting this option may lead to misdecodes for D 2 of 5 codes. D 2 of 5 - Any Length Discrete 2 of 5 Check Digit Verification Verify D 2 of 5 Check Digit *Do Not Verify D 2 of 5 Check Digit Transmit Discrete 2 of 5 Check Digit...
Page 42: Matrix 25
Matrix 25 Enable/Disable Matrix 25 To enable or disable Matrix 25, scan the appropriate bar code below. Enable Matrix 25 *Disable Matrix 25 Matrix 25 Check Digit Verification Verify Matrix 25 Check Digit *Do Not Verify Matrix 25 Check Digit Transmit Matrix 25 Check Digit - 38 -...
Page 43: Set Lengths For Matrix 25
Transmit Matrix 25 Check Digit (Enable) *Do Not Transmit Matrix 25 Check Digit Set Lengths for Matrix 25 The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains. Lengths for Matrix 25 may be set for any length, one or two discrete lengths, or lengths within a specific range.
Page 44: Length Within Range
Length Within Range Select this option to decode codes within a specified range. For example, to decode Matrix 25 symbols containing between 4 and 12 characters, first scan Matrix 25 Length Within Range, then scan 0, 4, 1 and 2 (single digit numbers must be preceded by a leading zero).
Page 45: Standard 25 Check Digit Verification
Standard 25 Check Digit Verification *Disable Standard 25 Check Digit Verification Enable Standard 25 Check Digit Verification Standard 25 Transmit Check Character *Disable Standard 25 Transmit Check Character Enable Standard 25 Transmit Check Character Set Lengths for Standard 25 The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains.
Page 46: One Discrete Length
One Discrete Length Select this option to decode only those codes containing a selected length. For example, select Standard 25 One Discrete Length, then scan 1, 4, to decode only Standard 25 symbols containing 14 characters. Numeric Bar Codes is in appendix. To change the selection or cancel an incorrect entry, scan Cancel in appendix. Standard 25 - One Discrete Length Two Discrete Lengths Select this option to decode only those codes containing two selected lengths.
Page 47: Codabar
Codabar Enable/Disable Codabar To enable or disable Codabar, scan the appropriate bar code below. Enable Codabar *Disable Codabar Set Lengths for Codabar The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains. Lengths for Codabar may be set for any length, one or two discrete lengths, or lengths within a specific range .
Page 48: Length Within Range
Length Within Range Select this option to decode a code within a specified range. For example, to decode Codabar symbols containing between 4 and 12 characters, first scan Codabar Length Within Range, then scan 0, 4, 1 and 2 (single digit numbers must always be preceded by a leading zero). Numeric Bar Codes is in appendix. To change the selection or cancel an incorrect entry, scan Cancel in appendix Codabar - Length Within Range Codabar - Any Length...
Page 49: Start/Stop Character Format
Enable Codabar Transmit Check Character Start/Stop Character Format You can choose your desired start/stop character format by scanning the appropriate barcode below. * ABCD/ABCD as the Start/Stop Character ABCD/TN*E as the Start/Stop Character *Start/Stop Character in Uppercase Start/Stop Character in Lowercase Enable/Disable MSI To enable or disable MSI, scan the appropriate bar code below.
Page 50: One Discrete Length
One Discrete Length Select this option to decode only those codes containing a selected length. For example, select MSI Plessey One Discrete Length, then scan 1, 4, to decode only MSI Plessey symbols containing 14 characters. Numeric Bar Codes is in Appendix. MSI - One Discrete Length Two Discrete Lengths Select this option to decode only those codes containing two selected lengths.
Page 51: Msi Check Character Verification
MSI Check Character Verification One Check Character Two Check Characters MSI Transmit Check Character Transmit Check Character Do Not Transmit Check Character GS1 DataBar/RSS Enable/Disable GS1 DataBar-14 To enable or disable GS1 DataBar-14, scan the appropriate bar code below. Enable GS1 DataBar-14 *Disable GS1 DataBar-14 Enable/Disable GS1 DataBar Limited To enable or disable GS1 DataBar Limited, scan the appropriate bar code below.
Page 52: Enable/Disable Gs1 Databar Expanded
Enable GS1 DataBar Limited *Disable GS1 DataBar Limited Enable/Disable GS1 DataBar Expanded To enable or disable GS1 DataBar Expanded, scan the appropriate bar code below. Enable GS1 DataBar Expanded *Disable GS1 DataBar Expande d PDF417 Enable/Disable PDF417 To enable or disable PDF417, scan the appropriate bar code below. Disable PDF417 - 48 -...
Page 53: Pdf 417 Twin Code
*Enable PDF417 PDF 417 Twin Code PDF417 twin code is 2 PDF417 barcodes paralleled vertically or horizontally. They must both be either regular or inverse barcodes. They must have similar specifications and be placed closely together. There are 3 options for reading PDF417 twin codes: Single PDF417 Only: Read either PDF417 code.
Page 54: Enable/Disable Qr
Read Phase Reversal Read Normal Phase/ Phase Reversal Read normal phase/ phase reversal/ mirror image picture Enable/Disable QR To enable or disable QR, scan the appropriate bar code below. Disable QRCode *Enable QR Code QR Twin Code *Single QR Only Twin QR Only - 50 -...
Page 55: Enable/Disable Qr Eci Output
Both Single & Twin Enable/Disable QR ECI Output *Disable QR ECI Output Enable QR ECI Output Read Normal Phase/ Phase Reversal *Read Normal Phase Read Phase Reversal Read Normal Phase/ Phase Reversal Data Matrix(DM) Scan normal or mirror image picture. Enable/Disable Data Matrix(DM) To enable or disable Data Matrix(DM), scan the appropriate bar code below.
Page 56: Data Matrix Twin Code
Disable Data Matrix *Enable Data Matrix Data Matrix Twin Code *Single Data Matrix Only Twin Data Matrix Only Both Single & Twin Enable/Disable Data Matrix ECI Output *Disable Data Matrix ECI Output Enable Data Matrix ECI Output - 52 -...
Page 57: Read Normal Phase/ Phase Reversal
Read Normal Phase/ Phase Reversal *Read Normal Phase Read Phase Reversal Read Normal Phase/ Phase Reversal Maxi Code Enable/Disable Maxi Code To enable or disable Maxi Code, scan the appropriate bar code below. *Disable MaxiCode Enable MaxiCode Aztec Code - 53 -...
Page 58: Enable/Disable Aztec Code
Enable/Disable Aztec Code To enable or disable Aztec Code, scan the appropriate bar code below. *Disable Aztec Code Enable Aztec Code Han Xin Code Enable/Disable Han Xin Code To enable or disable Han Xin Code, scan the appropriate bar code below. *Disable Han Xin Code Enable Han Xin Code Han Xin Twin Code...
Page 59: Read Normal Phase/ Phase Reversal
Both Single & Twin Read Normal Phase/ Phase Reversal *Read Normal Phase Read Phase Reversal Read Normal Phase/ Phase Reversal Plessey Enable/Disable Plessey To enable or disable Plessey, scan the appropriate bar code below. Enable Plessey - 55 -...
Page 60: Check Character Verification
*Disable Plessey Check Character Verification Enable Character Verification * Disable Character Verification Transmit Check Character Transmit Check Character Do Not Transmit Check Character Brazil Bank Code Enable/Disable Brazil Bank Code Only applied to 1D barcode, To enable or disable Han Xin Code, scan the appropriate bar code below. Enable Brazil Bank Code * Disable Brazil Bank Code COMPOSITE...
Page 61: Ean/Ucc
Enable COMPOSITE Code * Disable COMPOSITE Code EAN/UCC Enable/Disable EAN/UCC To enable or disable EAN/UCC, scan the appropriate bar code below. Enable EAN/UCC Code * Disable EAN/UCC Code Numeric Bar Codes Appendix 1: - 57 -...
Page 62 - 58 -...
Page 63: Cancel Barcode
Cancel Barcode To change the selection or cancel an incorrect entry, scan the barcode below. Cancel Hide Prefix or suffix digits The start/middle/end of barcode chars can be hidden. After scan below hide set barcode, scan a double-digit hexadecimal number that you want to hide char length(00~FF e.g. hide length 4, scan 0, 4). Hide Barcode Start Chars Hide Barcode Middle Char Start Hide Barcode Middle Chars...
Page 64: To Hide Chars Of Barcode Start/Middle/End
Enable Hide Barcode Middle Char Enable Hide Barcode End Char To Hide chars of barcode Start/Middle/End: Procedures 1. Scan the Hide Barcode Start / Middle Start / Middle length / End Chars symbol. 2. Determine the hex value for the length you wish to enter(hide 4 chars, scan 0,4; hide 12 chars, scan 0,C). 3.
Page 65: Numeric Bar Codes
Clear All Suffix Numeric Bar Codes - 61 -...
Page 66: Output Format
Output Format To change the Scan Data Transmission Format, scan one of the eight bar codes corresponding to the desired format. *Default output format Enable Suffix output - 62 -...
Page 67 Enable Prefix output Example on how to add normal prefix or suffix on barcode "123456789" Add " A" and "B" as prefixes and "!" as suffix 1. Scan command barcode of " Add Prefix" 2. Check the prefix hex value from the ASCII Chart. A- "4","1"; B-"4" "2"; 3.
Page 68 Add Suffix 6. Check the suffix hex value from the ASCII Chart. !- "2" "1" 7. Scan the 2 digit hex value from the Numeric Bar Codes. 8. Scan the output format to enable suffix output. Enable Suffix output 9. Scan the barcode then you will get AB123456789! Example on how to add Combination Key suffix for barcode "123456789"...
Page 69: Table 1. Ascii Character Equivalents
4. Scan the output format to enable suffix output. Enable Suffix output 5. Scan " Keyboard Ctrl Combination Key" Scan the barcode 123456789. (test it on Excel) Table 1. ASCII Character Equivalents ASCII ASCII ASCII ASCII Space " & < >...
Page 70 Page Down Right Arrow Left Arrow Down Arrow Up Arrow Print Screen *Ctrl *Shirt *Left Alt *Right Alt Insert Home Page Up Delete Support For any inquiries concerning our products, please send an email to service@gzxlscan.com, and we will respond to you as soon as possible. Contact Information Whatsapp: +86 188 2626 1132 Tel.:+0086 20-6626-0708...

Netum NT-1228BL Manual

Quick Links

Related Manuals for Netum NT-1228BL

Summary of Contents for Netum NT-1228BL

Table of Contents