Ricoh Aficio 1515 Service Manual page 39

PRINTER SCANNER UNIT
21. For the North America model only:
Attach the FCC decal [A] to the rear side of
the copier.
22. Reassemble the whole copier.
23. Attach the ferrite core [B] to the
network cable and attach the cable to
the copier if a network cable is used.
The end of the ferrite core must be
about 15 cm (6") from the end of the
cable [C].
24. Plug in the power cord.
25. Perform the Printer/Scanner settings.
1) Turn the main switch on.
2) Start the SP mode.
3) Select SP5-801-001 and execute
the initialization.
4) Turn the main switch off and on.
5) Start the SP mode.
6) Select SP5-302-002 and specify the
time zone.
7) Select SP5-307-001, 003, and 004 and
specify the daylight-saving-time settings.
8) Turn the main switch off and on.
26. Check the operations.
[A]
[C]
1-30
9 March 2004
B683I917.WMF
[B]
B441I108.WMF
B622I903.WMF