Ricoh Aficio 1515 Service Manual page 128

SERVICE PROGRAM
4903* ADS Level
4903 1 Adjusts the ADS level.
4904* ADS Lower Limit
4904 1 Adjusts the ADS lower limit.
4905* ADS Level
4905 1 Checks the whole area (0 = All) or the specific areas (1 = One) to adjust the ADS
level. The specific areas are as follows:
• ADF: ±37.5 mm from the center
• Platen Cover: 15 to 90 mm from the left edge
4921* Image Adj Selection
4921 1 Copy
Selects which mode the settings from SP4-922 to SP4-932 are used for.
0 = None
4 = Photo 2
8 = Special 3
4921 2 Fax
Selects which mode the settings from SP4-922 to SP4-932 are used for.
0 = None
4 = Photo 2
4921 3 Scanner
Selects which mode the settings from SP4-922 to SP4-932 are used for.
0 = None
4 = Photo 2
4922* Scanner Gamma
4922 1 Copy
4922 2 Fax
4922 3 Scanner
4923* Notch Selection
Selects the value of the center ID adjustment notch for the ID adjustment LEDs.
• Normally the center notch is 3 (range 1-5). If –1 is selected, each notch shifts
down (becomes lighter). If +1 is selected, each notch shifts up (becomes darker).
• This setting is applied to all image processing modes of SP4-921.
4923 1 Copy
4923 2 Fax
4923 3 Scanner
[0 ∼ 255 / 252 / 1/step]
[0 ∼ 255 / 80 / 1/step]
[0 = All / 1 = One]
[0 ~ 10 / 0 / 1/step]
1 = Text 1 2 =Text 2
5 = Photo 3 6 = Special 1
9 = Special 4 10 = Special 5
[0 ~ 5 / 0 / 1/step]
1 = Text 1 2 =Text 2
5 = Special 1
[0 ~ 4 / 0 / 1/step]
1 = Text 1 2 =Text 2
[0=System default/1=Text/2=Photo]
Selects "text" or "photo" as the priority output mode.
This setting is applied to all image processing
modes of SP4-921.
[–1 = Light / 0 = Normal / +1 = Dark]
5-30
9 March 2004
3= Photo 1
7 = Special 2
3= Photo 1
3= Photo 1