Table of Contents
Advertisement
ANL / 290-650
1.
GENERAL INSTRUCTIONS FOR THE INSTALLER
The EXTERNAL air cooled chillers of the ANL series with
R410A have been designed and manufactured to meet
the cooling needs of small and medium systems in
residential or commercial buildings.
1.1. CONSERVATION OF DOCUMENTATION
1.
Submit the manual with all supplementary
documentation to the system user who will be
responsible for the conservation of documents
so that they can be available when needed.
2.
Read this manual fully: all works must be carried
out by qualified personnel, in accordance with
any applicable current local regulations.
3.
The equipment warranty does not cover any
costs associated with lifting or access equip-
ment necessary for warranty procedures.
4.
Do not modify or tamper with the equipment
as this could result in accidents for which the
manufacturer will not be held responsible. The
warranty will be voided if the above mentioned
warnings are not respected.
2.
PRODUCT IDENTIFICATION
The ANL units are identified by:
1.
PACKING LABEL
(with product identification data).
2.
NAMEPLATE
(see figure below).
18.03. 5719210_03
1.2. SAFETY INSTRUCTIONS AND INSTALLA-
TION STANDARDS
1.
The equipment must be installed by a competent
and qualified technician, in compliance with the
applicable national legislation of the country of
destination. AERMEC assumes no responsibility
for any losses incurred by not observing these
instructions.
2.
Before commencing any works it is necessary
to CAREFULLY READ THE INSTRUCTIONS AND
MINIMISE ANY RISKS BY TAKING APPROPRIATE
SAFETY PRECAUTIONS. All relevant personnel
must be made aware of the procedures and
possible risks that may arise at the time of instal-
lation of the unit.
• NAMEPLATE
• NAMEPLATE
• NAMEPLATE
ANL 400
ANL 290-300-340
EN
ANL 580-620-650
5
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Variable Multi Flow ANL Series and is the answer not in the manual?