Important Safety Instructions - Happy Fabric HappyPress Operating Manual

Safety

Important Safety Instructions

Before you use your press, you should follow some basic precautions,
including the following:
Read the complete manual before you start to use your press. Use the press exclusively for prin-
ting textiles, or other suitable products that do not contain heat sensitive components, and have
not been treated with chemical additives.
Keep your press secure from rain, moisture, dirt, dust, direct sunlight, mechanical vibration or
shock, as well as keeping it well away from highly flammable or explosive materials.
Never pull out the power cord to turn off your press, but always use the ON/OFF switch. If the
machine will not be used for long periods of time, unplug the power cable carefully from the
wall socket.
The power cord must not come into contact with the hot plate (upper platen).
Never use your press with a damaged or defective power cable. In the event of any dama-
ge or defect, never remove the casing of your press, but discuss the problem directly with
a specialist who may be contacted during normal business hours by telephoning (+49)
030/89 747 348 and asking to talk to one of our experts. Opening the case will void the
warranty on the press.
Avoid using the press in locations where children, or third parties have unsupervised
access to the press. The minimum distance for children or other persons should be at least
1.5m away from the press to prevent burns and bruises.
When lifting the press for any reason you should grip the machine and not the casing, as
the casing contains plastic and delicate electronic components. Hold the press at the base
plate, or directly on the bottom. The press must be completely cooled, transported in the
original box.
Check before connecting the power cable that the operating mains voltage will be 230V.
The outlet must be fused with at least 10 amps. You should only connect one machine to
a mains socket, and not use an extension lead.
When using the machine for printing, it should never be left unattended (danger of fire).
Please take care when loading the machine, that it is fully open to avoid any burns.
Keep these instructions in a safe place.
17
www.happyfabric.de