Special Paper Setting - Ricoh B022 Service Manual

Hide thumbs Also See for B022:

Table of Contents

2.8.9 SPECIAL PAPER SETTING

Only the 2nd tray can feed special paper such as thick paper or envelopes. The

special paper type can be selected either by using the UP mode or with the

following operation.

• Select the 2nd tray then press the key.

After selecting the special paper type, the fusing temperature and transfer roller

current will be changed as follows.

1. Fusing temperature (when thick paper is selected):

Current operation temperature + 15 °C

2. Transfer roller current:

A3 width (11"): 14 µA

B4 width (10"): 15 µA

A4 width (8.5"): 17 µA

A5 width (5.5"): 20 µA

Note that for the by-pass tray, the fusing and transfer conditions for special paper

are also applied if the user uses thick (non-standard) mode.

B027D590.WMF