Sp7-Xxx: Data Log - Ricoh B022 Service Manual

6
Mode Number/Name
901 ADF APS Data Display
910* ADF Shading Interval Time
920 ADF Loop Back Test
1 DF GATE
2 DF TXD Break
3 Serial Communication
4 Original Set
5 Serial Check
925 Finisher/Duplex loop Back Test
1 Loop Back Test
2 Result
SP7-XXX: Data Log
7
Mode Number/Name
001* Main Motor Operation Time
002* Total Original Counter
1 All Modes
2 Copier
3 Fax
4 Document Box
5 Scanner
6 Others
003* Total Print Counter
1 All Modes
2 Copier
3 Fax
SM
SERVICE PROGRAM MODE
Function/[Setting]
Displays the status of the original size sensors in the
ADF. ( 4.2.10)
Adjusts the interval for shading processing in DF
mode.
Light and heat may affect the scanner response. If
copy quality indicates that white level is drifting during
a DF copy job, reduce this setting.
[0 ~ 120 / 20s / 1s/step]
DFU
0 = Gate, 1 = Asart
DFU
0 = Off, 1 = On
DFU
0 = NG, 1 = OK
DFU
0 = Off, 1 = On
DFU
DFU
DFU
Function/[Setting]
The number of prints and drive time for drum
revolutions can be obtained by counting the main
motor revolution time. If the amount of the time
required for the drum to revolve to print 1 copy
increases, this data combined with the number of
copies can be used to analyze problems and could be
useful for future product development.
Display: 00000000~99999999 min.
Select a number to display the total original count
(number of originals fed) for the selected item.
Select a number to display the total print count for the
selected item.
4-43 B022/B027