Avery Dennison Monarch ADTP2 EcoCut Instructions Manual page 11

3. Use the plastic end of the adhesive remover wand to scrape off the loosened adhesive.
Collect the adhesive with a cotton cloth and discard.
4. Let the printer dry and reload supplies.
Cleaning the Anvil
Use the foam end of the adhesive wand to dampen the outer edges of the anvil. Make sure the
entire anvil is clean. Using a small flat-head screwdriver, turn the cutter cartridge's screw
clockwise or counter-clockwise to move the cutter cartridge out of the way and clean the anvil's
other side.
Turn th e scr ew
Classification: Avery Dennison - Public 11