Disabled Point; 1: Responding To A Disabled Point - Honeywell NOTIFIER NCD Instruction Manual

Operation

4.5 Disabled Point

When a system point is dis-
abled it will display as fol-
lows on the NCD:
• Produces a pulsed
audible sound.
• Turns on the trouble
Relay.
• D appears in
ISABLED
the Header Bar.
• D illuminates
ISABLED
in the Alert Bar as a
yellow icon and
indicated device event
count.
• Illuminates the yellow
off normal LED.
• Displays
DISABLED
specific point
information in the
Screen Area.
• Displays information
on how to react to the
event in the
Informational Text
Area.
NOTE: If an unacknowledged, higher priority event exists, the NCD will retain the indications of the higher priority event, such as the LED,
audible tone, etc. The Trouble Relay, flashing event LED will still react at the time of the event
4.5.1 Responding to a Disabled Point
To acknowledge the disabled point and silence the NCD sounder do the following:
• The Informational Text Area on the screen will indicate step by step what needs to be done to acknowledge and silence the event.
• Tap on the
ACKNOWLEDGE
mark will appear next to the acknowledged event.
•
BLOCK ACKNOWLEDGE
• Tap on the
SILENCE
silenced.
• Enable the disabled point.
• Once all the events have been acknowledged the blue highlight indicator will move from the
touch point.
SILENCE
34
DISABLED
Step 1 Acknowledge each event. This is secondary text to explain what acknowledging an event means and who should do it.
FIRE ALARM UNACKNOWLEDGED DISABLES (1)
DISABLED
CO ALARM DISABLE MON
SUPERVISORY
TROUBLE
1
and
DISABLE
OTHER
SIGNALS
SILENCED
touch point located in the Header Bar. The acknowledge touch point will be highlighted in blue. A check
allows for multiple events to be acknowledged at once.
touch point located in the Header Bar. The
Third Floor, Storage Room
Figure 4.5 Disabled Screen
icon in the Alert Bar will illuminate blue once the NCD is
SILENCE
NCD Instruction Manual — P/N LS10210-051NF-E:C 2/18/2019
Disabled Point
Thu 2/22/18
1:38:06PM
Silence Reset
Ack
Thu 02/22/18
1:35:57 PM
NO25L01M023
touch point to the
ACKNOWLEDGE