Other: Events that are listed as Other are as follows:
4.6 Other: Events that are listed as Other are as follows:
Events listed as Other are as
follows:
•
CO Pre-Alarm (blue).
•
Critical Processes
(yellow).
•
Security (blue).
•
Pre-Alarm (red).
•
Hazard/Weather Alert
(Yellow).
When more than one of
these conditions have been
activated they will be listed
in order of priority. CO-Pre
Alarm will be listed first,
followed by Critical Pro-
cesses, Security, Pre-Alarm
and Hazard/Weather Alert.
4.6.1 Responding to an Other event.
To acknowledge an Other event and silence the NCD sounder do the following:
•
The Informational Text Area on the screen will indicate step by step what needs to be done to acknowledge and silence the event.
•
Tap on the
ACKNOWLEDGE
mark will appear next to the acknowledged event.
•
BLOCK ACKNOWLEDGE
•
Tap on the
SILENCE
silenced.
•
Once all the events have been acknowledged the blue highlight indicator will move from the
touch point.
SILENCE
•
Tap
for an latched event.
RESET
NCD Instruction Manual — P/N LS10210-051NF-E:C 2/18/2019
SECURITY ALARM
Step 1 Acknowledge each event. This is secondary text to explain what acknowledging an event means and who should do it.
FIRE ALARM
UNACKNOWLEDGED SECURITY ALARMS(1)
SECURITY ALARM
SECURITY L
CO ALARM
SUPERVISORY
TROUBLE
DISABLE
1
OTHER
SIGNALS
SILENCED
touch point located in the Header Bar. The acknowledge touch point will be highlighted in blue. A check
allows for multiple events to be acknowledged at once.
touch point located in the Header Bar. The
First Floor, Guest Room
Zone Z553 (Z553)
Figure 4.6 Other Event Screen
icon in the Alert Bar will illuminate blue once the NCD is
SILENCE
Operation
Thu 2/22/18
1:38:06PM
Silence
Reset
Ack
Thu 02/22/18
1:52:57 PM
NO25L01M011
touch point to the
ACKNOWLEDGE
35