Test/Diagnostics - Honeywell NOTIFIER NCD Instruction Manual

Test/Diagnostics

3.5 Test/Diagnostics
Tapping on the Test/Diagnostics touch
point on the menu screen will display
diagnostic and lamp test options for the
NCD.
Tap the
Lamp Test
point to turn on all pixels on the screen.
This will illuminate the entire screen as
well as the AC Power and Off Normal
LED for approximately four seconds.
During this time a tone will sound. A
black spot on the screen will indicate
that a pixel is out.
Tap the
Diagnostics
touch point allows the user to view the
Circuit Board temperature and the CPU
temperature. It displays the highest
circuit board temperature and the highest
CPU temperature, each may be reset by
tapping on them. The user will be
prompted to tap
RESET
readings.
Tap the
History
HISTORY
allows the user to view the panel history
as well as the network history. History
views may also be filtered. Tap on the
touch point . A touch point for
FILTER
and
SEARCH CLEAR
with a virtual keyboard Tap in a date
under date range to search a specific date
range. Tap in a keyword in the
section to search the history for
TEXT
particular text. To clear a search tap the
touch point . Tap on the
CLEAR
BACKGROUND ACTIVATIONS
to select that feature. Tap again to clear
the field.
NCD Instruction Manual — P/N LS10210-051NF-E:C 2/18/2019
touch
LAMP TEST
FIRE ALARM
CO ALARM
SUPERVISORY
TROUBLE
DISABLE
OTHER
SIGNALS
SILENCED
DIAGNOSTICS
FIRE ALARM
to reset the
CO ALARM
touch point
SUPERVISORY
TROUBLE
will appear along
DISABLE
CONTAINS
OTHER
EXCLUDE
SIGNALS
check box
SILENCED
System Normal
Menu - > Test/Diagnostics
Test/Diagnostics
DIAGNOSTICS
Figure 3.12 Test/Diagnostics Screen
System Normal
Figure 3.13 Diagnostics Screen
Ack Silence Reset
LAMP TEST HISTORY
Ack Silence Reset
Programming
Thu 2/22/18
1:38:06PM
Thu 2/22/18
1:38:06PM
27