Table of Contents
Advertisement
About this Manual
Display Conditioning
Every 30 minutes the display will enter Display conditioning mode. During Display Conditioning the display will transition through var-
ious screens including a completely blank screen. This process takes about seven seconds. It is done to prevent image persistence, and
keeps information clear and undistorted. Any display interaction will abort Display Conditioning mode. Display conditioning mode will
not activate if there are active alarm conditions.
NOTE: Display Conditioning mode is not configurable.
1.9 Technical Specifications
Power Input: 24VDC.
USB is 2.0, USB A and USB Micro are located on the Core Board, USB C is located on the front of the NCD display.
USB Ports:
Touch Screen Display:
360mA in Standby. 380mA in Alarm.
Current draw:
Tamper and Trouble Input:
30VDC 2A
Trouble Relay:
10
10 inch High Definition Touch Screen Display.
Tamper and Trouble inputs.
NCD Instruction Manual — P/N LS10210-051NF-E:C 2/18/2019
Technical Specifications
Hide quick links:
Advertisement
Table of Contents
