Replacing A Front Turn Signal Light Bulb Or An Auxiliary Light Bulb - Yamaha FINO AF115F Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
A
ZAUU0803
1. Do not touch the glass part of the bulb.
1. Place the vehicle on the center-
stand.
2. Remove panel A. (See page 7-7.)
3. Disconnect the headlight coupler,
and then remove the bulb cover.
2
7
1
ZAUU1016
1. Headlight bulb cover
2. Headlight bulb coupler
3. Bulb cover mark (▲)
4. Unhook the headlight bulb holder,
and then remove the burnt-out
bulb.
1
ZAUU1017
1. Headlight bulb holder
5. Place a new headlight bulb into
position, and then secure it with
the bulb holder.
3
6. Install the headlight bulb cover,
and then connect the coupler.
7. Install the panel.
8. Have a Yamaha dealer adjust the
headlight beam if necessary.
7-28
Replacing a front turn signal
light bulb or an auxiliary light
bulb
If a front turn signal light or an auxiliary
light bulb burns out, replace it as fol-
lows.
1. Remove panel A. (See page 7-7.)
2. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
1
ZAUU1018
1. Front turn signal light bulb socket
2. Auxiliary light bulb socket
3. Remove the burnt out bulb by pull-
ing it out.
4. Insert a new bulb into the socket.
EAUU0941
2