Replacing A Front Turn Signal Light Bulb Or An Auxiliary Light Bulb; Replacing The Tail/Brake Light Bulb Or A Rear Turn Signal Light Bulb - Yamaha Jupiter Fi T115FS-5 Owner's Manual

Periodic maintenance and adjustment
Replacing a front turn signal
light bulb or an auxiliary light
bulb
If a front turn signal light or an auxiliary
light bulb burns out, replace it as fol-
lows.
1. Remove cowling A. (See page
7-7.)
2. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
1
7
2
ZAUV0366
1. Turn signal light bulb socket
2. Auxiliary light bulb socket
3. Cowling A
3. Remove the burnt out bulb by
pulling it out.
EAUV0610
ZAUV0367
1. Bulb
4. Insert a new bulb into the socket.
5. Install the socket (together with
3
the bulb) by turning it clockwise.
6. Install the cowling.
Replacing the tail/brake light
bulb or a rear turn signal light
1
bulb
1. Remove panel B. (See page 7-7.)
2. Remove the cover.
3. Remove the outer lens by remov-
1. Outer lens
2. Screw
3. Cover
4. Remove the inner lens by remov-
5. Remove the burnt-out tail/brake
7-31
ing the screw.
1
2
ZAUV0368
ing the screw.
light bulb by pushing it in and turn-
ing it counterclockwise. Remove
the burnt-out rear turn signal light
bulb by pulling it out.
EAUN0143
3