3. Place an oil pan under the final
transmission case to collect the
used oil.
4. Remove the final transmission oil
filler cap and its O-ring from the fi-
nal transmission case.
5. Remove the final transmission oil
drain bolt and its gasket to drain
the oil from the final transmission
case.
1
ZAUU0625
1. Final transmission oil drain bolt
6. Install the final transmission oil
drain bolt and its new gasket, and
then tighten the bolt to the speci-
fied torque.
PERIODIC MAINTENANCE AND ADJUSTMENT
Tightening torque:
Final transmission oil drain bolt:
22 Nm (2.2 m·kgf, 16 ft·lbf)
7. Refill with the specified amount of
the recommended final transmis-
sion oil. WARNING! Make sure
that no foreign material enters
the final transmission case.
Make sure that no oil gets on
the tire or wheel.
[EWA11311]
Recommended final transmission oil:
See page 9-1.
Oil quantity:
0.14 L (0.15 US qt, 0.12 Imp.qt)
8. Install the final transmission oil fill-
er cap and its new O-ring, and
then tighten the oil filler cap.
9. Check the final transmission case
for oil leakage. If oil is leaking,
check for the cause.
7-13
Air filter and V-belt case air
filter elements
The air filter element should be re-
placed at every 16000 km (10000 mi)
and the V-belt case air filter element
should be cleaned at the intervals
specified in the periodic maintenance
and lubrication chart. Service the air fil-
ter elements more frequently if you are
riding in unusually wet or dusty areas.
Checking and replacing the air filter
element
1. Place the vehicle on the center-
stand.
2. Remove the air filter case cover by
removing the screws.
EAUU1142
7