Using The Tape Counter; Connecting Rca Audio/Video Input Cable - Samsung SV-G600 Instruction Manual

Using the Tape Counter

GB
The tape counter:
0:00:00
1
2
V-LOCK
3
CLR/RST F.ADV INDEX
-/--
SELECT
2
TV VCR INPUT
REPEAT
-/--
SELECT
TV VCR INPUT
REPEAT
AUDIO DISP./
VOL PROG/TRK
2
32
Indicates the elapsed time in the play and record modes
(hours, minutes and seconds)
Is reset when a cassette is inserted in the VCR
Allows you to find the beginning of a sequence easily
If the remaining time is to be calculated correctly, you
must indicate the type of cassette being used.
Insert a cassette in your VCR.
To set the tape counter to zero at the beginning of a sequence:
Press DISP./ twice to display the counter
Press CLR/RST when you want to set the tape counter to
zero
When you are ready,
Start playback or Recording.
Press the button.
To fast-froward or rewind to the sequence at which the
counter was set to zero, press ➛ ➛ or ❿ ❿ .
Some VCR information, such as the counter, can be
displayed on the television screen (unless you have
deactivated the OSD mode; refer to page 14).
Press DISP./ :
Once to display the current function, programme
number, recording speed, date, time and counter
Twice to display the counter only
Three times to display the time remaining on the
cassette
Four times to clear the display
Connecting an RCA Audio/Video Input Cable
You can connect other audio/video equipment to your VCR using
audio/video cables if the appropriate outputs are available on the
equipment chosen.
Examples: You wish to copy a video cassette with the help of a
second VCR (see page 34).
You wish to play back and/or copy pictures taken
with a camcorder (see page 34).
You wish to dub a prerecorded video cassette with
sound from a stereo system (see page 35).
Regardless of the type of connection chosen, you
must always connect the coaxial cable supplied.
Otherwise, no picture will be visible on the screen
when the VCR is switched off.
Make sure that both the television and the VCR are
switched off before connecting the cables.
1 Connect one end of the RCA audio/video cable into the VIDEO
INPUT socket on the front of the VCR.
2 Plug the other end of the audio/video cable into the appropriate
output connector on the other system (VCR or camcorder).
3
Connect one end of the RCA audio cable supplied into the AUDIO
INPUT sockets on the front of the VCR.
Take care to respect the colour coding of the left and right
channels.
4
Plug the other end of the audio cable into the appropriate output
connectors on the other system (VCR, camcorder or Hi-Fi sound
system).
GB
EJECT
STANDBY/ON
VIDEO L - AUDIO - R
LINE IN 2
1
EJECT
STANDBY/ON
VIDEO L - AUDIO - R
LINE IN 2
3
3
33