Warning; Shipping And Storage - Ecosoft AquaPoint User Manual

USER'S MANUAL. AQUAPOINT FILTER

6. WARNING

DO NOT EXCEED the force of tightening up more than 2 kg/cm.
DO NOT EXPOSE the equipment to any physical impact (mechanical shock,
additional mechanical load).
After installation or replacement of the filter do not leave it unattended during the next 2 hours.
Make sure the filter operates correctly, and there are no water leaks in the connections.
Do not use it to purify hot water.
Replace filters on time.
Keep the filter away from direct sunlight.
Install the filter in the place that cannot be reached by children.
In case there are long breaks in its application, turn off water supply to the filter.
Do not apply the filter to the microbiologically dangerous water or water of unknown quality
without its prior disinfection.
Before installation of the filter make sure your water supply system operates correctly, and
corresponds to the technical requirements of the filter operation conditions.
REMEMBER!
Improper (poor) connection, rejection of the services of qualified specialists, non-observance
of rules of installation and application, untimely maintenance of the equipment release the
manufacturer from responsibility in case of emergency situations with the filter.

7. SHIPPING AND STORAGE

• Transportation of the equipment is allowed by any means of transport (except for non-heated
during the cold seasons).
• The equipment must be kept in the original package detached at least 1 m from heating
appliances with ambient temperature from +5 to +40 °С. Drying, freezing and exposure to direct
sunlight are strictly forbidden.
• We recommend that the purchase is made in the authorized centers. You should check integrity
of the package and the equipment, as well as availability of documentation (passport, warranty
certificate, document confirming the purchase).
This manual is the intellectual property of Ecosoft. Copying and reprinting is prohibited. © 2018
15