Setup; Installing The Speed-Selector Lever; Checking The Fluid Levels And Tire Pressure - Toro 320-D Operator's Manual

Setup

1
Installing the
Speed-Selector Lever
Parts needed for this procedure:
1 Speed-selector lever
Procedure
1. Remove and discard the nut securing the bolt
and lock washer to the speed-selector lever.
2. Secure the lever to the speed-selector valve
using the bolt, lock washer, and nut as illustrated
in Figure 3.
1. Speed-selector lever
2. Speed-selector valve
Figure 3
3. Nut
2
Checking the Fluid Levels
and Tire Pressure
No Parts Required
Procedure
Before starting the engine for the first time, check the
engine-oil level, hydraulic-fluid level, engine-coolant
level, and the tire pressure. Refer to the following
sections for more information:
•
Checking the Engine-Oil Level (page 29)
•
Checking the Hydraulic-Fluid Level (page 38)
•
Checking the Engine-Coolant Level (page 35)
•
Checking the Tire Pressure (page 35)
g230938
9