Toro 320-D Operator's Manual page 14

Parking-Brake Lever
•
To engage the parking brake, rotate the lever
down (Figure 9).
•
To release the parking brake, rotate the lever up
(Figure 9).
1. Parking-brake
lever—engaged
Indicator Lights
The indicator lights warn you in the case of a system
malfunction and, in the case of the glow-plug light,
indicate that the glow plugs are on.
illustrates the 4 indicator lights.
Figure 10
1. Oil-pressure light
2. Battery light
•
Engine-Temperature Light
If the engine-temperature light is on, the engine
is overheating. Shut off the engine and allow the
machine to cool down. Check the coolant level
and the belts to the fan and water pump. Fill
the coolant as required and replace any worn or
slipping belts. If the problem persists, contact your
Authorized Service Dealer for diagnostics and
repair.
•
Oil-Pressure Light
This light is on for a few seconds whenever you
start the engine. If the oil-pressure light is on while
the engine is running, the engine-oil pressure is
low. Shut off the engine and allow the machine
to cool down. Check the oil level and fill the
crankcase with oil as needed. If the problem
Figure 9
2. Parking-brake
lever—disengaged
Figure 10
3. Engine-temperature light
4. Glow-plug light
persists, contact your Authorized Service Dealer
for diagnostics and repair.
•
Battery Light
This light is on for a few seconds whenever you
start the engine. If the battery light is on while
the engine is running, the alternator, battery, or
electrical system is malfunctioning. Contact your
Authorized Service Dealer for diagnostics and
repair.
•
Glow-Plug Light
This light is on when the key is turned to R
before starting the engine. The glow-plug light
remains on for up to 10 seconds, indicating that
the glow plugs are warming the engine. If the
glow-plug light is on while the engine is running,
g005956
the glow plugs are malfunctioning. Contact your
Authorized Service Dealer for diagnostics and
repair.
g005941
14
UN