Specifications; Attachments/Accessories; Before Operation; Before Operation Safety - Toro 320-D Operator's Manual

Specifications

Note:
Specifications and design are subject to
change without notice.
Width
Length
Height
Weight (without attachment or
counterweight)
Weight of the counterweight
Operating capacity—with 74.8 kg (165
lb) operator, the standard bucket, and
without the counterweight
Tipping capacity—with 74.8 kg (165
lb) operator, the standard bucket, and
without the counterweight
Wheelbase
Dump height (with standard bucket)
Reach—fully raised (with standard
bucket)
Height to hinge pin (narrow bucket in
standard position)

Attachments/Accessories

A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to www.Toro.com for a list of all
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
Operation

Before Operation

103 cm (41 inches)
152 cm (60 inches)

Before Operation Safety

125 cm (49 inches)
783 kg (1,722 lb)
General Safety
•
227 kg (500 lb)
227 kg (500 lb)
454 kg (1,000 lb)
•
71 cm (28 inches)
•
120 cm (47 inches)
66 cm (26 inches)
168 cm (66 inches)
•
•
•
•
•
•
•
•
15
Never allow children or untrained people to
operate or service the machine. Local regulations
may restrict the age or require certified training of
the operator. The owner is responsible for training
all operators and mechanics.
Become familiar with the safe operation of the
equipment, operator controls, and safety decals.
Always engage the parking brake (if equipped),
shut off the engine, remove the key, wait for all
moving parts to stop, and allow the machine
to cool before adjusting, servicing, cleaning, or
storing the machine.
Know how to stop the machine and shut off the
engine quickly.
Check that the operator's presence controls, safety
switches, and shields are attached and functioning
properly. Do not operate the machine unless they
are functioning properly.
Locate the pinch-point areas marked on the
machine and attachments; keep your hands and
feet away from these areas.
Before operating the machine with an attachment,
ensure that the attachment is properly installed
and that it is a genuine Toro attachment. Read all
the attachment manuals.
Evaluate the terrain to determine what accessories
and attachments you need to properly and safely
perform the job.
Have the property or work area marked for buried
lines and other objects, and do not dig in marked
areas; note the location of unmarked objects and
structures, such as underground storage tanks,
wells, and septic systems.
Inspect the area where you will use the equipment
and remove all debris.
Ensure that the area is clear of bystanders before
operating the machine. Stop the machine if
anyone enters the area.