Teknion Savera Adjustment Features & Instructions

BACK TILT ADJUSTMENT
SYNCHRO-TILT TASK:
The tilt control paddle on the left
locks the chair into four different
positions.
To tilt the chair, sit in the chair and
unlock the paddle by pushing it
down, which will release the back
to free flow. To lock in position,
pull the paddle up and the back
will lock in position.
BACK TILT ADJUSTMENT
SYNCHRO-TILT XL:
The back tilt adjustment paddle is
located underneath the seat on the
left side. The back tilt adjustment
provides the ability to lock the back
into four different positions or
leave in free-flow.
To tilt the chair, sit in the chair and
unlock the paddle by pulling it up,
which will release the back to free
flow. To lock the desired position,
push the paddle down and the
back will lock.
TENSION CONTROL
SWIVEL-TILT TASK:
The tension-adjustment knob for
the swivel-tilt is located in the
middle directly under the seat.
Turning the knob will increase or
decrease tension.
savera adjustment features & instructions
SWIVEL-TILT TASK:
The swivel-tilt control lever is
located on the right. To tilt the
chair, sit in the chair and pull the
handle outward. Leaving the
handle in this position, the chair is
now in free flow mode and can
reach any position between upright
and fully reclining. To lock (upper
position only), bring chair to
upright position and push the
handle in.
SYNCHRO-TILT TASK:
The tension-adjustment wheel for
the synchro tilt Task chair is
located on the right. Leaning back,
decide if the resistance of the chair
is comfortable. If it is too stiff, turn
the tension adjustment knob
counter-clockwise. If the chair
back does not provide enough
resistance, turn the knob clockwise.
SYNCHRO-TILT XL:
The tension-adjustment wheel is
located underneath the seat on the
right side.
Leaning back with the back tilt
adjustment paddle in the up
position, determine if the resistance
of the chair is comfortable. If the
resistance is too stiff, turn the
tension adjustment wheel counter-
clockwise. If the chair back does
not provide enough resistance, turn
the wheel clockwise.
BACK TILT ADJUSTMENT
TENSION CONTROL
TENSION CONTROL