Caliber RCD 263BT Manual page 9

"RETUNE L or RETUNE S"
retune):
This function allows you to set the duration
after which the automatic search for traffic
information or a station with an identical PI
should be carried out.
- RETUNE L mode:
will take place after 90 seconds.
- RETUNE S mode:
will take place after 30 seconds.
"MASK DPI or MASK ALL":
Any alternative frequency (AF) with a
different PI or which does not broadcast an
RDS signal that is strong enough will
normally be masked when the PI is checked
while the unit searches for an alternative
frequency. The unit will not automatically go
to this type of alternative frequency. It is
possible that an AF which does not
broadcast a strong enough RDS signal is a
valid AF, but that the car radio wrongly
considers it as a station with a different PI
due to interference. For this reason, the unit
offers the user an option (MASK DPI) which
does not mask the AFs which do not
broadcast a strong RDS signal.
- MASK DPI mode:
Only masks the alternative frequencies with
a different PI.
- MASK ALL mode:
Masks alternative frequencies with a strong
signal that have a different PI or which do
not emit a strong enough RDS signal.
"TAVOL 17" (Traffic announcement volume
):
This function allows you to define the
minimum volume for the traffic announce
ments. The adjustable range is 0~45. The
defaulted value is 17.
control to adjust the volume of the traffic
announcements.
"CLOCK 24 or CLOCK 12"
This unit is equipped with two types of clock
display formats, 24 hours and 12 hours.
Rotate the volume control to choose 24
hours format or 12 hours format.
"BEEP ON/OFF"
The car audio device is equipped with
confirmation beep tone.
- Beep on: The confirmation beep sound
will be heard when any button is pressed.
- Beep off: The confirmation beep sound is
(long/short
The automatic search
The automatic search
Rotate the volume
(Clock format):
( beep sound on/off
disabled.
Rotate the volume control to select switch
on or off the confirmation beep sound
Mute on/off
In power on mode, briefly press the
button (
muted state will be also released when the
Volume control button is used.
To select playback mode
In power on mode, press the
repeatedly to select the different modes as
the following sequence: TUNER, DISC(with
a CD/MP3/WMA disc inside the disc slot),
USB(with USB device inserted), SD/MMC
(with SD/MMC card inserted), AUX IN
(auxiliary input), BT AUDIO mode.
Last position memory feature
- During disc, USB, SD/MMC card playback,
if you turn off the unit and then switch on it,
the unit will resume playing from the point
that it was interrupted.
-During disc, USB, SD/MMC card playback,
if you switch to other mode, and then return
the previous mode again, the unit will
resume playing from the point that it was
interrupted.
Information display
Press the
as follows:
- When receiving an RDS station
In radio mode:
CT -> FREQUENCY -> PS(Name of the
station) -> PTY(Type of program) ->
-
In CDP/USB/SD/MMC mode:
CT -> FREQUENCY -> PS(Name of the
station) -> PTY(Type of program) -> Track
or file number and Running time ->
Note:
If the unit does not receive any
information, the
be shown on the LCD display
-
When
): In radio mode:
CT -> FREQUENCY -> PTY NONE->
In CDP/USB/SD mode:
CT -> FREQUENCY -> PTY NONE ->
Track or file number and Running time
) to toggle mute on or off.
DISP button repeatedly to display
character
receiving a non RDS station:
.
MUTE
The
MODE button
:
PTY
"PTY NONE" will
.