Printer Settings; Settings - Thermo Scientific CryoExtra CE8100 Series Operating And Maintenance Manual

2. Press "ENTER"
The display will read "Temperature
Menus".
3. Press "SETUP"
Until the display reads "Display and
Output".
4. Press "ENTER"
The display will read "Temperature
Units".
5. Press "SETUP"
Until the display reads "Advanced
Display and Output".
6. Press "ENTER"
The display will read "Alarm
Buzzer".
7. Press "SETUP"
The display will read "Language".
Use the " " keys to adjust
and press "ENTER" to save.
Printer
This section describes how to adjust the Printer settings. For
instructions on how to connect a printer, see the
"Communication / Networking" section.
Note: Security Level 2 or higher is required to adjust the

Printer settings.

1. Press "SETUP"
Controller will prompt for a
password. A flashing cursor on the
entry screen will make it clear
which digit is being changed. Use the "
to the appropriate number. Press "ENTER" to advance the
cursor to the next position.
2. Press "ENTER"
The display will read "Temperature
Menus".
3. Press "SETUP"
Until the display reads "Display
and Output".
Thermo Fisher Scientific CryoExtra CE8100 Series
Press ENTER for
Temperature Menus or
press SETUP for next
menu
Press ENTER for
Display and Output or
press SETUP for next
menu
Temperature Units °C
Use to adjust
Press ENTER to save
Press ENTER for
Advanced Display and
Output or press SETUP
for next menu
Alarm Buzzer
ENABLED
Use to adjust
Press ENTER to save
Language ENGLISH
Use to adjust
Press ENTER to save
Higher User Level
Required use to
ENTER Password 0000
" keys to scroll
Press ENTER for
Temperature Menus or
press SETUP for next
menu
Press ENTER for
Display and Output or
press SETUP for next
menu
4. Press "ENTER"
The display will read "Temperature
Units".
5. Press "SETUP"
Until the display reads "Advanced
Display and Output".
6. Press "ENTER"
The display will read "Alarm
Buzzer".
7. Press "SETUP"
Until the display reads "Printer
Menu".
8. Press "ENTER"
The display will read "Print
Interval". Use the "
adjust and press "ENTER" to save.
9. Press "SETUP"
The display will read "Print
Header". Press "ENTER" to print a
new header.
10. Press "SETUP"
The display will read "Print Event".
Press "ENTER" to print a new
event.
Advanced Settings
This section describes how to change the various Advanced

Settings.

Timed Filling
The Controller has several advanced filling options including
Timed Filling. Timed Filling allows the user to set a regular
filling schedule based on a fill start time and a fill frequency. If
a facility staff would like the peace of mind of knowing that all
the freezers are full of LN
then they could set up a timed fill for every Friday afternoon.
Even if the LN level in a freezer is above Low Level Setpoint,
2
the Controller will initiate a fill and top off the freezer to its High
Level Setpoint. If the liquid level is at or above the High Level
Setpoint, then the Controller will skip that timed fill event and
not initiate a fill.
A Controller with a Timed Filling schedule will still maintain
Auto Fill Control. If Timed Filling and Auto Fill Control are
enabled, then the Controller will still initiate a fill anytime the
Temperature Units °C
Use to adjust
Press ENTER to save
Press ENTER for
Advanced Display and
Output or press SETUP
for next menu
Alarm Buzzer
ENABLED
Use to adjust
Press ENTER to save
Press ENTER for Printer
Menus or press SETUP
for next menu
Print Interval 30 min
Use to adjust
" keys to Press ENTER to save
Press ENTER to Print
Header or press SETUP
for next menu
Press ENTER to Print
Event or press SETUP
for next menu
before leaving for the weekend,
2
Operation | 31