Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Thermo Scientific HyPerforma S.U.B. TK
Summary of Contents for Thermo Scientific HyPerforma S.U.B. TK
- Page 1 Thermo Scientific HyPerforma S.U.B. TK (Resistive) Quick Start Guide...
- Page 2 Thermo Scientific HyPerforma S.U.B. TK (Resistive) Quick Start Guide Rev. 1.0...
-
Page 3: Section 1 Hardware Installation
The arm has a slide that can extend and retract manually using the clamping knob. Figure 1. Cable and Tubing Organizer Figure 2. Cable and Tubing Organizer Adjustment Feature Thermo Scientific S.U.B. TK Resistive Quick Start Guide... - Page 4 (e.g. Snoop or similar product to detect leaks). • Connect the RTD (temperature probe) cable (● ●). This cable ● should be in a box that was shipped with the tower. Thermo Scientific S.U.B. TK Resistive Quick Start Guide...
- Page 5 Position this hardware directly opposite of the motor, as shown. Figure 4. 250 L S.U.B. TK System • Attach probe clips to probe window (front of the S.U.B.). The probe clips were shipped with the S.U.B. unit. Thermo Scientific S.U.B. TK Resistive Quick Start Guide...
- Page 6 Power Connection • Connect cable labeled RES HEATER (● ● ●) to the power source on the Tower • Connect cable labeled HEATER POWER IN (● ● ●) into designated tower connector. Thermo Scientific S.U.B. TK Resistive Quick Start Guide...
-
Page 7: Power Connections
There are two ¼-20 socket head cap screws that need to be removed from each load cell protection plate. Move the tower to desired position and lock in place and level using the leveling feet. Thermo Scientific S.U.B. TK Resistive Quick Start Guide... -
Page 8: Power Up The System
• Refer to User’s Guide for detailed instructions on calibration steps (load cells, sensors, etc). Begin Booting Up • A virtual keyboard icon is located at the bottom of the window display for notes, values, etc. Thermo Scientific S.U.B. TK Resistive Quick Start Guide... -
Page 9: Section 2 Bpc Installation
4. Remove the protective black cap from the bearing assembly and slide into the retention mechanism on the agitation motor and lock it into place. Figure 6. Bearing port inserted into motor mount slot and clamp Thermo Scientific S.U.B. TK Resistive Quick Start Guide... - Page 10 “probe belt opening on the tank”. 6. Uncover vent filters, wrap heating blankets (if used) around the filters, attach/adjust vent bracket, and mount vent filters in bracket. Figure 8. Filter being placed in bracket Thermo Scientific S.U.B. TK Resistive Quick Start Guide...
- Page 11 Figure 9. BPC linesets 10. Connect the pressure sensor cable onto the sensor located at the top of the BPC. Figure 10. Pressure sensor Thermo Scientific S.U.B. TK Resistive Quick Start Guide...
- Page 12 • Sensor should be inserted until base of probe meets the mouth of the thermo-well. • Secure by twisting the luer lock collar. The thermo-well will stretch slightly when RTD is seated. Figure 13 Figure 14 Thermo Scientific S.U.B. TK Resistive Quick Start Guide...
-
Page 13: Section 3 Software Start Up
Note, you must bring up the keyboard FIRST before opening a drop down menu. Also note that the keyboard can be moved and repositioned. Figure 15 Initial TruBio View With Log On Breakout Thermo Scientific S.U.B. TK Resistive Quick Start Guide... - Page 14 • Thermo Turnkey 50L Jacketed SUB Load the new configuration by clicking the “Load” button on the right. Select “Yes” when the pop up window appears. The screen automatically jumps to the “Home” display window. Thermo Scientific S.U.B. TK Resistive Quick Start Guide...
- Page 15 Quick Start Guide Figure 17 “Home” Monitor View Thermo Scientific S.U.B. TK Resistive Quick Start Guide...
- Page 16 ©2012 Thermo Fisher Scientific Inc. All rights reserved. Cell Culture & BioProcessing 925 West 1800 South In Americas/Asia In Europe www.thermoscientific.com/subtk Logan, UT 435-792-8000 +32 53 85 71 80 Thermo Scientific S.U.B. TK Resistive Quick Start Guide 84321 435-792-8001 fax +32 53 85 74 31 fax...