Advertisement
User manual
4. Motor adjustment
1.
Push the motor pulley over the motor spindle and lock in
place by gently tightening the three screws in the side of
the pulley. (If not already factory adjusted)
2.
Place the drive belt first around the lower drive platter and
then around the motor pulley.
3.
Statement V2
Plug the supplied
mains supply.
4.
To assembly the tonearm please refer to the instruction manual of the manufacturer.
Statement V2
The setup of your
Clearaudio wish you al lot of pleasure and musical enjoyment with your
16
power supply first into the back of the motor, and finally into the
turntable is now complete!
Pic. 21: Setting the motor pulley
Back view
Pic. 22: Placing the drive belt
Statement V2.
© clearaudio electronic GmbH, 2018/05
Advertisement
