MTI Designer 112 Installation And Operational Manual page 15

Installation and Operational
Operation Instructions - Combined Therapy
Airbath with LED Lights and Radiance®
#4R System
ON/OFF FOR RADIANCE
1st Press: Turns on both heated zones LED indicator light on.
2nd Press: Turns off Radiance system. LED indicator light off.
ON/OFF: AIRBATH
1st Press: The blower starts. LED indicator light on.
2nd Press: The blower stops. LED indicator light off.
BLOWER SPEED INCREASE
Press & hold to increase the blower speed. Release pressure at the desired speed.
Note: The blower initially starts at 30% speed.
BLOWER SPEED DECREASE
Press & hold to decrease the blower speed. Release pressure at the desired speed.
SPA MODE (AIR ONLY)
1st Press (Wave): Speed will vary gradually from maximum to minimum. LED indciator light on.
2nd Press (Pulse): Speed will go directly to minimum and then straight back to maximum. LED
indicator light will flash.
3rd Press: Returns to maximum speed. LED indicator light off. Press button #3 to decrease blower
speed.
ON/OFF: CHROMATHERAPY
1st Press: Turns on basic color mode of bath lights, starting with white. Use up and down arrows to
move light through basic colors.
2nd Press: Turns on slow rainbow cycle. Use up and down arrows to increase or decrease speed
of cycle.
3rd Press: Slow aqua-blue-green cycle. Use up and down arrows to increase or decrease speed of
cycle.
Press & hold light button at any time to turn off Chromatherapy feature.
STANDARD DRYING CYCLE WITH WATER DETECTORS:
Sensors on the floor near the drain will activate the drying cycle approximately 7 minutes after the bath is
drained and run for 1-2 minutes. The drying cycle will activate even when the air system has not been turned
on. The blower LED blinks (on keypad only) during the drying cycle countdown. This countdown cannot be
cancelled. Any attempt to cancel this cycle only resets the countdown timer.
OPERATIONAL VIDEOS:
Please visit
Manual °
mtibaths.com/support/installation-operation/
Designer Collection ° Acrylic Freestanding Tubs
for detailed operation instructions.
mtibaths.com / 12