Safety Instructions - infaco A3M V2.0 Instructions For Using Manual

SAFETY INSTRUCTIONS

Disconnect the machine from its battery for all operations apart from tying.
DO NOT LEAVE THE TYING MACHINE SWITCHED ON DURING TRANSPORT.
L'attacheuse doit impérativement être déconnectée de sa batterie pour les opérations
suivantes :
- When you are putting on or removing the battery belt.
- For all repair or maintenance jobs on the tying machine.
When the machine is in operation, always remember to keep your hands away from the
tying head.
Never leave your battery on charge for more than 15 hours.
Do not work with the tying machine if you are tired or if you don't feel well.
Wear non-skid shoes.
Do not leave the machine within the reach of children or visitors.
Never carry the charger by its cable. Keep the cable away from heat, oil and cutting
edges
Never use the machine at night or in poor light without setting up extra lighting.
This machine does not cause vibrations or jerks.
Do not leave the machine on the ground and do not leave it exposed to bad weather.
When using the machine, keep both feet firmly on the ground and stay as well balanced
as possible.
If the supply cable on your charger is damaged, have it changed by the INFACO factory
or an approved A3M retailer.
Do not use the machine if there is a risk of fire or explosion, e.g. the
presence of inflammable liquids or gases.
Never place the charger in contact with water
Mandatory
21