infaco A3M V2.0 Instructions For Using Manual page 12

Position 1 = tight knot.
Pull the machine back approximately
1 to 2 cm, then press the control
switch.
To vary the number of turns, move
the wheel 01 to the right or left
01
Adjustments vary from 3 to 6 turns.
The standard knot adjustment is 4
twists.
TIGHTENING THE KNOT
ADJUSTING THE NUMBER OF TURNS
Position 2 = loose knot.
Pull the machine back approximately
3 to 4 cm, then press the control
The number of twists increases the
holding power of the tie.
Ask your retailer to help you choose
the best compromise to suit your re-
gion, the type of wire you are using
and the tying method.
12
switch
3 to 6
twists