Using Printer Menus; Printer Button - OKIDATA Pacemark 3410 Instruction Manual

Printing Forms (continued)
For this Use these
form... printer settings...
Payroll Checks Leave at Triad defaults
Price Labels Leave at Triad defaults
W-2 Forms Change LPI to 8
Leave all others at Triad
defaults

Using Printer Menus

You need to know how to use printer menus to change printer settings. The
printer menus are directories of printer features. Menus are organized into
three levels, which correspond to these printer buttons:
Use the buttons on the front panel of the printer to change printer settings as
shown in the table below.
The , , ,
GROUP ITEM SET
can use them. To activate these buttons, press
on the front printer panel at the same time. Menu Mode prints on the
PITCH
printer paper indicating the buttons are activated.
The
CHARACTER PITCH
(CPI), is ready for use and does not require activation.
For an example of how to change a printer setting, see "Changing Printer
Settings" on page 4.

Printer Button

GROUP
ITEM
SET
EXIT
Using Printer Menus
, and buttons must be activated before you
EXIT PRINT
PRINT QUALITY
button, which is used to change the characters per inch
How to use it...
Press repeatedly to cycle through the groups in the
menu. Stop when the setting you want prints on
the printer paper.
Press to change an item within a group.
Press to change an item setting.
Press to save the printer settings and return to
print mode.
Use for this report...
If DX10, PRM #4 (Payment
Processing)
If Eagle, PPTU (Payment
Processing)
RLA (Price Label Printing
Report)
If DX10, PRM #10 (Print
Year-End W-2 Forms)
If Eagle, RPW2 (Print Year-
End W-2 Forms)
, , and
GROUP ITEM
and
CHARACTER
.
SET
Tip
If you skip a menu set-
ting, keep pressing the
appropriate menu but-
ton to cycle through the
menu again.
3