Changing Printer Settings - OKIDATA Pacemark 3410 Instruction Manual

Changing Printer Settings

Tip
If you skip a menu set-
ting, keep pressing the
appropriate menu but-
ton to cycle through the
menu again.
4
Printer Button How to use it... ( continued )
Press to print a complete listing of the current
PRINT
printer settings.
Press to change the CPI.
CHARACTER PITCH
Depending on your printer settings, this button
may not highlight the CPI you want to select.
If you are unable to use
change a CPI setting, follow the example in
"Changing Printer Settings."
Depending on the form you want to print, you may need to change the printer
settings. Use the printer buttons as shown in the previous table to change
printer settings. After selecting all appropriate settings, press
settings are saved and you are ready to print the form.
The example below shows you how to change the CPI for 8 1/2 x 11 inch paper
from CPI 10 to CPI 17. Use the same procedure shown in this example to
change any printer setting.
1. Press and
PRINT QUALITY
Mode.
Menu Mode prints on the printer paper. You can use
, and to change printer settings.
PRINT EXIT
2. Press to print the current printer settings.
PRINT
Use the list of current printer settings to identify menus and to determine
which settings you need to change. For example, if you are changing the
CPI, change all occurrences of the CPI shown on the printout.
You can also use the Pacemark 3410 Triad Default Printer Settings table on
page 5 to identify printer menus, and as a reference to the Triad default
printer settings.
3. Refer to the Printing Forms table on page 2 to determine the CPI for
8 1/2 x 11 inch paper. The table indicates that the CPI should be changed
from CPI 10 (the default) to CPI 17.
4. Press until the text on the printer paper matches the example below:
GROUP
Printer Mode
Font
5. Press until the text on the printer paper matches the example below:
ITEM
Printer Mode
CHARACTER PITCH
at the same time to enter Menu
CHARACTER PITCH
Emulation
Print Mode
Emulation
Pitch I
Changing Printer Settings
to
. The printer
EXIT
, , ,
GROUP ITEM SET
EPSON FX
HSD
EPSON FX
10 CPI
(or any CPI)